Why Won’t My Computer Connect To Wireless Brother Printer? (Solution found)

First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Now try to connect your Brother printer to the WiFi now. Try to connect your Brother printer to the Wifi using WPS method.

Why is my Brother printer not connecting to my computer?

Ensure that the power LED on the printer is stable and not flickering. Check the connection between the computer and the Brother Printer; ensure that the computer is connected to the printer. Ensure that the printer status has not stopped. Ensure that the Brother Printer driver is up-to-date.

How do I connect my Brother printer to my computer wirelessly?

Set up the wireless connection manually with the printer driver installed (For Windows)

  1. Make sure that the printer driver, Printer Setting Tool, and P-touch Editor are installed on your computer.
  2. Turn on the printer.
  3. Make sure the printer’s Wi-Fi LED is flashing.
  4. Connect the printer to the computer with a USB cable.
You might be interested:  How To Put Paper On Brother Printer? (Correct answer)

Why is my computer not connecting to my wireless printer?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

How do I make sure my Brother printer is discoverable?

Press and hold the Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button. Connect the printer to the computer with a USB cable. Start the Printer Setting Tool on the computer, and click [Communication Settings].

Why can’t My Brother printer find my WiFi?

First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Now try to connect your Brother printer to the WiFi now. Try to connect your Brother printer to the Wifi using WPS method.

How do I reset my Brother wireless printer?

FAQs & Troubleshooting

  1. Press. (Settings) > All Settings > Network > Network Reset.
  2. Reset Network? will be displayed. Press Yes.
  3. Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.

How do I connect my Brother wireless printer without cable?

Press and hold the WiFi button on your machine for about 2 seconds, until the light begins to blink. The WiFi button will light up when connected. You have completed Wireless Setup on your Brother machine.

You might be interested:  How Do I Send A Fax From My Brother Printer? (Solved)

Why is my printer not discoverable?

Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer’s system.

Where do I find the WPS PIN on my Brother printer?

Press Network. Press WLAN. to display WPS w/PIN Code, and then press WPS w/PIN Code. The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.

How do I know if my Brother printer is connected to WiFi?

Check your machine’s wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report. If your WLAN report is stating “Connection OK”, although you can not scan, refer to “Check the wireless status on the WLAN report” and check “Connection: OK”.

How do I get my computer to recognize my printer?

Add a local printer

  1. Connect the printer to your computer using the USB cable and turn it on.
  2. Open the Settings app from the Start menu.
  3. Click Devices.
  4. Click Add a printer or scanner.
  5. If Windows detects your printer, click on the name of the printer and follow the on-screen instructions to finish the installation.

How do I get my printer to recognize my WiFi?

How to Fix the Problem

  1. Try connecting to the printer with a cable. This allows you to see whether the WiFi signal is the issue.
  2. Find a new spot for the printer.
  3. Check the printer queue.
  4. Reboot the printer.
  5. Make sure the firmware is up-to-date.
  6. Confirm that your mobile device is on the right network.
  7. Reset the printer.
You might be interested:  How To Sync Brother Wireless Printer?

How do I connect my Brother printer to my computer?

Add your printer to your computer on Windows 10

  1. Turn on your printer.
  2. On your keyboard, press the Windows logo key and click the Settings button.
  3. Select Devices.
  4. Select Printers & scanners, and then click Add a printer or scanner.
  5. Select the printer you want and click Add device.

How do I connect my Brother HL L2320D printer to WIFI?

BROTHER HL L2320D PRINTER WIRELESS SETUP Agree to the License Agreement by ticking the checkbox near it. Make the connection method as wireless configuration. Continue with the process by tapping the Next button on the screen. Enter the network name and its password when the system prompts.

How do I connect my Brother HL L2350DW to WIFI?

Turn on your Brother HL-L2350DW printer. Use the arrow button key on the printer’s control panel to select “Network” and press OK. Use the arrow button key on the printer’s control panel to select “WLAN” and press OK. Use the arrow button key on the printer’s control panel to select “Setup Wizard” and press OK.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]