Why Does My Brother Printer Constantly Tell Me Low Toner When Just Replaced? (Question)

Verify the toner cartridge is installed correctly. If you install a new genuine Brother toner cartridge but the “Toner Low”, “Replace Toner” or “Toner Ended” error indication remains, the toner cartridge may not be installed correctly.

Why does my printer say low toner when I just changed it?

This means a new cartridge was installed and the TONER LOW message cleared.

How do you reset the toner low on a Brother printer?

How to Reset Toner Low Message on Brother MFC-7340

  1. With your printer ON, open the front door (cover)
  2. Press Clear/Back Button once.
  3. Press *00 (*zero zero)
  4. The message on the display should now read Accepted.
  5. Close the front cover.
  6. Your toner is now reset.

How do I restart my Brother printer after changing toner?

FAQs & Troubleshooting

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new toner cartridge.
  6. Remove the protective cover.
You might be interested:  Which Brother Printer Can Print Checks? (Solved)

Will Brother printer print if low on toner?

You do NOT have to install a new toner cartridge and you can still print when the TONER LOW message appears, but it is a good idea to have a new genuine Brother toner cartridge on hand for when the toner does reach its end of life.

Why is my Brother toner not working?

Your Brother printer will display the “no toner” message if the printer’s drum unit assembly or your toner cartridge was installed incorrectly. So if your Brother printer does not detect toner, you need to uninstall and reinstall the drum unit assembly and toner cartridge to rectify the problem.

How do you keep your brother toner on?

Press Menu. Press the Up or Down arrow key to display the General Setup option, and then press OK. Press the Up or Down arrow key to display the Replace Toner option, and then press OK. Press the Up or Down arrow key to display the Continue or Stop option, and then press OK.

How do I reset my brother tn 420 toner?

Press the “Go” button 2 times – The “Toner, Drum, and Error” LEDs will turn ON. Press the “Go” button 6 times for a TN420 or Press the “Go” button 7 times for Brother TN450. Close the front cover after “Error” LED starts to flash. Finally, The reset procedure has been completed.

Why does replace toner continue to appear on the LCD after I replaced the toner?

This means a new cartridge was installed and the Replace Toner message cleared. Then, after printing some pages, Replace Toner re-appeared on the display.

You might be interested:  Why Doesn't My Brother Business Smart Series Printer Turn On? (TOP 5 Tips)

Can you still print with low toner?

You do NOT have to install a new toner cartridge and you can still print when the TONER LOW message appears, but it is a good idea to have a new genuine Brother toner cartridge on hand for when the toner does reach its end of life.

How do I keep my printer from printing with low toner?

You can continue printing with the toner cartridge beyond its estimated print life by enabling “Continue Mode”. Continue Mode will force the machine to continue printing after the error message or the Status Monitor message indicates Replace Toner.

Does shaking the toner cartridge help?

Toner cartridges tend to last a long time, but they are also very expensive to replace. Try removing the cartridge and shaking it 15-20 times before replacing it back in the printer. There are no guarantees, but shaking a toner cartridge can often restore some life – at least for another 20-30 pages.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]