Where Is The Paper Tray On A Brother Printer? (Perfect answer)

How to load the paper tray

  1. If the paper support flap (1) is open, and then close the paper support (2).
  2. Pull the paper tray completely out of the machine.
  3. Open the output paper tray cover (1).
  4. Gently press and slide the paper width guides (1) and paper length guide (2) to fit the paper you’re loading.

Where do you put the paper in a Brother printer?

Load paper in the paper tray with the printing surface face down. Make sure the paper is below the maximum paper mark ( ). Overfilling the paper tray will cause paper jams. Slowly push the paper tray completely into the machine.

Where is the paper tray in a printer?

Paper is housed in the printer’s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper. Within the paper tray, you will notice a guide that can be adjusted to fit your preferred paper length.

You might be interested:  How To Make A Copy On A Brother Printer? (TOP 5 Tips)

How do you load a paper tray?

How To Load Paper in Tray 1

  1. Pull out and remove the tray.
  2. Move out the length and width guides.
  3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
  4. Load the paper into the tray, then adjust the paper guides in the tray to match the paper size.

How do I open the tray on my Brother printer?

How to load the paper tray

  1. If the paper support flap (1) is open, and then close the paper support (2).
  2. Pull the paper tray completely out of the machine.
  3. Open the output paper tray cover (1).
  4. Gently press and slide the paper width guides (1) and paper length guide (2) to fit the paper you’re loading.

How do you open a brother paper tray?

Close the output paper tray cover. Slowly push the paper tray completely into the machine. While holding the paper tray in place, pull out the paper support (1) until it clicks, and then unfold the paper support flap (2).

Can you add a tray to Brother printer?

Click the Accessories tab and click Auto Detect. After Tray 2 has been detected, click Apply. – If Auto Detect does not detect the tray, you can manually add it. Under Available Options, select the tray, click Add and then Apply.

How do I change the tray on my Brother printer?

You can change the default tray your Brother machine uses for printing copies by following these steps: Press MENU and choose General Setup => Tray Use => Copy.

  1. Press MENU and choose General Setup => Tray Use => Print.
  2. Press the UP OR DOWN ARROW key to select a setting.
  3. Press the OK key.
  4. Press the STOP/EXIT key.
You might be interested:  Reset Brother Printer When Tpner Is In? (Solved)

What is tray in printer?

Office printing needs can vary throughout the day, and multiple printer trays are a great time saver, allowing users to print to different paper sizes or types without needing to swap out printer stock.

How do you load paper in a Brother MFC 9340cdw?

Pull the paper tray completely out of the machine. While pressing the green paper-guide release lever (1), slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots. Fan the stack of paper well to avoid paper jams and misfeeds.

Where is Tray 1 on HP printer?

Tray 1 is the small slot in the front for manually feeding paper. The paper cassette which holds the paper and slides out is called tray 2. Please select tray 2 in the print driver and see if it now works.

How do I remove the duplex tray from my Brother?

Wait at least 10 minutes for the machine to cool down. Pull the paper tray completely out of the machine. Pull the duplex tray completely out of the machine. Pull the jammed paper out of the machine or the duplex tray.

How do you remove the paper jam on a Brother printer DCP t510w?

Unplug your Brother machine from the AC power outlet (electrical socket). Pull the paper tray (1) completely out of the machine. Pull the two green levers inside the machine to release the jammed paper.

How do you clear a paper jam on a Brother printer?

Lift the scanner cover to release the lock (1). Gently push the scanner cover support down (2) and close the scanner cover (3). Again, turn the unit around and check if there are paper jams. After making sure there are no paper jams, reinstall the Jam Clear Cover.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]