What Is Drum Error On The Brother Printer?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. 1. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

How do I fix the drum error on my Brother printer?

Drum Error (Drum!)

  1. The corona wires have become dirty. Clean the corona wires in the drum unit.
  2. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
  3. If the issue still continues, the drum unit is at the end of its life.

How do you reset a brother drum error?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.
You might be interested:  How To Stop Brother Printer From Printing On Both Sides? (Perfect answer)

What does drum mean on Brother printer?

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.

How do I clean the drum on a Brother printer?

Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

How do you fix a printer drum?

Make sure that the printer is on and open the front cover. Remove the toner cartridge and drum unit from the machine. Push down the green lock lever and remove the toner cartridge from the drum unit. Once the new drum is replaced, you will need to reset the drum counter.

  1. Replace Drum.
  2. Drum End Soon.
  3. Drum Stop.

What does it mean when the printer says drum?

A drum unit is a maintenance item for your Brother printer (or other manufacturer Laser printer) that will sometimes need to be replaced but not as often as a toner cartridge. Therefore, you will always find that drum unit is located very close to or even attached to the toner cartridge.

How do I know if my Brother printer needs a new drum?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

You might be interested:  How To Reset Brother 2170w Printer? (Best solution)

What happens if I don’t replace printer drum?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

How do I reset the drum end on my Brother printer?

“Drum End Soon” message

  1. Open the front cover.
  2. Hold down Ok until Drum Unit is displayed, and then press Ok.
  3. Press ▲ to reset. Machine will display Accepted.
  4. Close the front cover.

How do you reset the drum on a Brother HL l2370dw?

How to reset the drum counter:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

How do you reset the drum on a Brother printer mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do you clean a printer drum?

After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.

You might be interested:  How To Install Brother Wireless Printer? (Best solution)

What is printer drum life?

Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]