What Does Unable To Change 8f Mean On A Brother Printer?

The message “Unable to Print 8F” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; Using both hands, use the finger holds on each side of the machine to life the scanner cover into the open position.

How do I fix 8F unable to print?

1 Answer. 8F means either a paper tore inside while it was printing and jammed, or some other mechanical malfunction has occurred. Open your printer, take out the toner, and the back panel if there is one. Look inside to see if you see anything jammed or stuck.

How do I get my Brother printer out of error mode?

You can do it in a few simple steps by unplugging the power cord from the wall outlet and then again switching it on. You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers. The technicians also suggest the same.

You might be interested:  Brother Printer When Scanning Cannot Connect To Pc? (Question)

How do I fix the troubleshooting on my Brother printer?

Follow the Best Troubleshooting Tips for Brother Printer: Try shutting down the printer and restart it if you encounter any problems in between periods. Periodically check the network / USB cable or USB port. Uninstall the old driver and reinstall the latest version of the printer driver.

Why is my Brother printer giving me an error?

Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.

How do I get my printer out of error state?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

How do I reset my Brother printer?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

Why is my Brother printer not printing even though it has ink?

Verifying the ink cartridges are installed properly and/or cleaning the print head may resolve this problem. Verify the ink cartridges are installed correctly. – If your Brother machine has the INK or INK MANAGEMENT key on its control panel, press the INK or INK MANAGEMENT key.

You might be interested:  How To Get More Copies Out Of Brother Printer? (Best solution)

Why am I getting a printing error?

Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer. This can be the printer drivers or the USB port drivers.

How do I fix Error 48 on Brother printer?

Troubleshooting Print Head problem

  1. Plug out the printer power cord.
  2. Lift the scanner cover gently.
  3. Look inside the printer. If there is any paper part jammed, remove it.
  4. Do check for any scrap beneath the printer head.
  5. Move the printer head to the center if it is hung in the right or left corner.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]