What Does It Mean When Brother Printer Says Drum End Soon? (Perfect answer)

The message Drum End Soon indicates the drum unit will need to be replaced soon. You can replace the drum unit when you feel the print quality is no longer acceptable or when the message Replace Drum is displayed.

How do I reset the drum end on my Brother printer?

“Drum End Soon” message

  1. Open the front cover.
  2. Hold down Ok until Drum Unit is displayed, and then press Ok.
  3. Press ▲ to reset. Machine will display Accepted.
  4. Close the front cover.

How do I fix the drum error on my Brother printer?

Drum Error (Drum!)

  1. The corona wires have become dirty. Clean the corona wires in the drum unit.
  2. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
  3. If the issue still continues, the drum unit is at the end of its life.
You might be interested:  How To Scan From Brother Printer To Computer Windows 10? (Solution found)

How long should a drum last on a Brother printer?

The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.

Can a Brother printer drum be cleaned?

Clean the roller by gently wiping the entire surface of the drum with an alcohol swab, such as a medical pad or wipe, or cotton swab lightly moistened with isopropyl alcohol (91% strength alcohol is preferred, but 70 75% strength alcohol is also acceptable).

How do I clear my drum End Soon message?

How do I clear the message ‘ Drum End Soon ‘ from the display?

  1. Open the front cover.
  2. Press the CLEAR key.
  3. Press the UP ARROW key to select YES.
  4. Close the front cover.
  5. Confirm the display or status monitor message is no longer there.

What happens if I don’t replace printer drum?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

What causes drum error on the Brother printer?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

You might be interested:  How To Set Up Wireless Printer Brother Hl2270dw Mac?

What is drum on Brother printer?

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.

How do I know if my Brother printer needs a new drum?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

What happens when printer drum goes bad?

What happens when a printer drum goes bad? When the drum wears out, you’ll begin seeing lines or faults repeated across the page. Replace the drum unit when you get white lines on your pages.

What is the purpose of the drum in a printer?

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.

What is printer drum life?

Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

How do I get my Brother printer to clean itself?

Press or to select the following:

  1. Select [General Setup]. Press OK.
  2. Select [Maintenance]. Press OK.
  3. Select [Print Head Cleaning]. Press OK.
  4. Select [Black only], [Colour only], or [All]. Press OK.
  5. Select [Normal], [Strong], or [Strongest]. Press OK.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]