To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

•

Why is my Brother printer not connecting to WiFi?

Primary Guide to Solve Brother Printer WiFi Connection Problem. First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi- Fi on your Brother printer and then again turn it on. Try to connect your Brother printer to the Wifi using WPS method.

How do I reset the WiFi on my Brother printer?

FAQs & Troubleshooting

1. Press. (Settings) > All Settings > Network > Network Reset.
2. Reset Network? will be displayed. Press Yes.
3. Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.

Why is my WiFi not connecting to my printer?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

Where is the wireless setup wizard?

On the printer’s control panel, go to the Network menu or touch the wireless icon and then go to settings. Select Wireless Setup Wizard. The Wireless Setup Wizard displays a list of wireless networks in the area.

How do I get my computer to recognize my printer?

Add a local printer

1. Connect the printer to your computer using the USB cable and turn it on.
2. Open the Settings app from the Start menu.
3. Click Devices.
4. Click Add a printer or scanner.
5. If Windows detects your printer, click on the name of the printer and follow the on-screen instructions to finish the installation.

How do I connect my Brother printer to my laptop?

You can connect most Brother printers to nearly any laptop.

1. Go to Brother-USA.com.
2. Select “Printers” under the “Select Product Group” drop-down menu.
3. Select your computer’s operating system.
4. Restart your computer.
5. Turn on your computer and printer and wait for your computer to recognize and establish the USB connection.

How do I know if my Brother printer is connected to WIFI?

Check your machine’s wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report. If your WLAN report is stating “Connection OK”, although you can not scan, refer to “Check the wireless status on the WLAN report” and check “Connection: OK”.

Why is my Brother printer not discoverable?

Verify that all devices on the network where your PC and the Brother machine are connected work correctly. Turn off the Brother machine and turn it back on. The built-in network card may not work for some reason. Turn off the Brother machine and turn it back on, this will reset the network card.

How do I reset my wireless printer?

To do this, power down the printer and then unplug the power cord from the wall. Wait for a minute, then plug the printer back in and power it back up. Wait for the cartridges to center, and then try printing again. If your issue persists, you can also try resetting the printer to the default or factory settings.

Why won’t my iPhone find my wireless printer?

If an AirPrint-enabled printer isn’t showing up on your iPhone, head to the printer’s network settings and ensure its Wi-Fi is enabled. Most importantly, make sure the printer is connected to the same Wi-Fi network as your iPhone. If the problem persists, the printer could be blocked or blacklisted on the network.