How To Reset The Indicator Lights On A Brother Hl-2240 Laser Printer? (Solution)

Brother HL-2240 – Reset Toner Cartridge Open the printer front cover. Hold the Go button while turning the printer on. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button. All of the LEDs will turn off.

How do I turn off the toner light on my Brother printer?

Press the ‘go’ button (or ‘start’ button) 5 times. The toner light should be off (the error may be flashing). The paper light should be on or flashing. Close cover.

Why is my Brother printer orange light flashing?

Why Is My Brother Printer Orange Light Flashing [Reasons & Solutions] Your Brother Printer orange light is flashing because of a toner-related error such as no toner, low toner, improper toner installation, and “replace toner”.

How do I fix the blinking light on my Brother printer?

FAQs & Troubleshooting

  1. Turn the printer off.
  2. Press and hold the Go button on the front of the printer, at the same time turn the printer power on.
  3. When the Toner light is on by itself, release the Go button.
  4. Push and hold the Go button again, when the Paper light is on by itself, release the Go button.
You might be interested:  How To Clear The Replace Toner Message On Brother Printer Hl2270dw?

How do I reset my brother Toner HL 2240?

Brother HL-2240 – Reset Toner Cartridge Open the printer front cover. Hold the Go button while turning the printer on. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button. All of the LEDs will turn off.

How do I reset my Brother printer HL?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

Why is the toner light on my Brother printer?

If a toner cartridge from another machine was installed (even if there’s still toner left in the used cartridge), the Toner LED would continue to flash or stay on. To clear the message, a new genuine Brother toner must be installed. 2. Open the front cover and remove the drum and toner assembly.

How do I reset my brother ink cartridge?

Method 2

  1. Turn your Brother printer on and open the toner door.
  2. Now, Press the “Clear/Back” button on the printer to access the Reset Menu.
  3. Futher, Use the arrow keys to scroll through the printer’s toner cartridge reset options.
  4. Now, Press “1” to reset the ink cartridge and then press “Clear/Back” to quit the menu.

How do I clear a Brother printer error?

To clear these messages, follow these steps:

  1. Press the ON/OFF key to turn the Brother machine off.
  2. Unplug the Brother machine from the electrical outlet.
  3. Wait approximately ten seconds.
  4. Plug the Brother machine back into the electrical outlet.
  5. Press the ON/OFF key to turn the Brother machine on.
You might be interested:  How To Change Print Quality On Brother Printer? (Solved)

How do I remove the error code on my Brother printer?

Brother printer error If you are facing Brother printer error code 54, switch your printer off and back on again. In many cases, a restart of the printer already fixes the problem. Another possible solution is to remove the toner before turning the printer back on.

How do I reset my Brother HL 2130 printer?

Brother HL-2130 – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

How do you reset the drum on a Brother HL 2321d?

Drum Stop

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]