How To Reset The Drum On Brother Printer Hl-5470ddw?

Step 1: Turn on the Brother HL-5470DW. Step 2: Open the front cover of the printer by pressing the front cover release, then pulling the front cover forward. Step 3: Press and hold the green Go button for five seconds, until you see a message on the display that says Drum Clear.

How do you reset the drum on a Brother HL l23200?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

How do I reset my drum light on my brother?

To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.

You might be interested:  How To Copy Front And Back On Brother Printer Mfc-l2700dw? (Correct answer)

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

Can a Brother printer drum be cleaned?

Clean the roller by gently wiping the entire surface of the drum with an alcohol swab, such as a medical pad or wipe, or cotton swab lightly moistened with isopropyl alcohol (91% strength alcohol is preferred, but 70 75% strength alcohol is also acceptable).

How do I reset my brother hl 2130 drum unit?

How to reset the drum counter:

  1. Make sure the machine is on, then open the front cover.
  2. Press and hold the “Go” button for about 4 seconds or until all the LEDs light up.
  3. Release the “Go” button and close the front cover.
  4. If the drum light is off, the drum unit is reset.

How do you reset the drum on a HL l2380dw?

How to reset the drum counter:

  1. Make sure the front cover is closed.
  2. Press the “X” on the printer to display to interrupt the “replace drum” message.
  3. Press the tool button (settings) > All Settings > Machine Info. >
  4. Hold down the # button on the keypad until the LCD message changes to the reset menu.

How do you reset the drum on a Brother printer HL 2140?

Brother HL-2140 – Reset Drum Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.

You might be interested:  How Do I Uninstall A Brother Printer On A Mac? (Solved)

How do I reset my brother hl 2250dn printer?

Brother HL-2250 – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

How do I reset my Brother printer?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

What does drum error mean on Brother printer?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

What does it mean when it says replace drum on a Brother printer?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

You might be interested:  How To Connect To Wifi On My Brother Printer? (TOP 5 Tips)

What is printer drum life?

Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How Do I Connect My Brother L2700dw Printer To The Internet? (Solved)

To set up your Brother machine on a wireless network: Connect the power cord to your Brother machine and then connect it to an electrical socket. Press Menu button on the machine’s control panel. Press the Up or Down arrow key to select Network and press OK. Press the Up or Down arrow key to […]

How To Get Brother Printer Oback Online? (TOP 5 Tips)

If the printer status is Offline Right-click the icon for your Brother machine > See what’s printing > Printer > Use Printer Offline (remove the checkmark). If Use Printer Offline is greyed out, click Open As Administrator. Enter your administrator password, and then click Yes. Contents1 Why does my Brother printer keep saying its offline?2 […]