How To Reset The Drum On A Brother Printer Hl5470dw? (Solved)

Step 1: Turn on the Brother HL-5470DW. Step 2: Open the front cover of the printer by pressing the front cover release, then pulling the front cover forward. Step 3: Press and hold the green Go button for five seconds, until you see a message on the display that says Drum Clear.

How do I reset my Brother printer drum?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.
You might be interested:  Which Brother Label Printer Use M Tape? (Solved)

Why does my Brother printer keep telling me to replace the drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

What is drum error on the Brother printer?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. 1. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

How do you reset the drum on a Brother printer HL L5100DN?

HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
  4. Press for [Reset] to reset the drum counter.
  5. Close the front cover of the machine.

How do you reset the drum counter on a Brother HL l2380dw?

How to reset the drum counter:

  1. Make sure the front cover is closed.
  2. Press the “X” on the printer to display to interrupt the “replace drum” message.
  3. Press the tool button (settings) > All Settings > Machine Info. >
  4. Hold down the # button on the keypad until the LCD message changes to the reset menu.

How do I reset my printer after replacing drums?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.
You might be interested:  How To Connect My Brother Printer To The Wifi? (Solution found)

How do you reset the drum on a Brother printer mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do you reset the drum counter on a Brother MFC 9335cdw?

When you replace a drum unit with a new one, you must reset the drum counter by completing the following steps:

  1. Press Cancel to interrupt the error.
  2. Press Settings.
  3. Press All Settings.
  4. Swipe up or down or press the Up or Down arrow key to display Machine Info.
  5. Press Machine Info.
  6. Press Parts Life.

How do you reset the drum counter on a Brother MFC l2740dw?

How to reset the drum counter:

  1. Press the “X” on the printer to display to interrupt the “replace drum” message.
  2. Press the tool button (settings) > All Settings > Machine Info. > Parts Life.
  3. Hold down the # button until the LCD message changes.
  4. Press “Drum” and then select “Yes”
  5. Select the home button.

What happens if you don’t replace the drum in a printer?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

How do you fix a brother drum error?

Drum Error (Drum!)

  1. The corona wires have become dirty. Clean the corona wires in the drum unit.
  2. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
  3. If the issue still continues, the drum unit is at the end of its life.
You might be interested:  How To Print From Laptop To Brother Printer? (Question)

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]