Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

How do I reset my Brother printer to factory settings?

Press the Up arrow key select Reset.

1. Press the Settings button.
2. Press All Settings.
3. Press Initial Setup.
4. Press Reset.
5. Press All Settings or Factory Reset (depends on which model you have).
6. Press Yes.
7. Press Yes again and hold for two seconds.

Is there a reset button on Brother printers?

Easiest and Best Way to Reset Brother Printer: Go to the “Settings” option and press “All Settings”. After that, go to the “Initial Setup” section and press the “Reset” button. Press the Up and Down keys to display the type of reset function, and then press the reset function key that you want to use.

How do I reset my printer?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.

What does machine reset do on Brother printer?

Use the Machine Reset function to reset the machine’s settings to the factory settings. The network settings and the security settings will not be reset by the Machine Reset function.

How do I clear the memory on my Brother printer?

Press the blue key labeled BLACK START or the green key labeled COLOR START on the Brother machine to send or copy the pages you have scanned so far. Press the STOP/EXIT key to cancel the job. a. If the ‘Out of Memory’ message continues to appear, you should clear some jobs from your Brother machine’s memory.

How do I reset my Brother HL L2300D printer?

Brother HL-L2300D Toner Reset

1. Press and Hold the Power button until the machine turns off.
2. Open the Toner Door.
3. Press and Hold the Go button until step 5.
4. Press the Power button.
5. Release the Go button when the Toner, Paper, and Drum lights are lit.
6. Press the Go button 9 times.

How do I get my Brother printer out of error mode?

You can do it in a few simple steps by unplugging the power cord from the wall outlet and then again switching it on. You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers. The technicians also suggest the same.

How do I reset my Brother HL 2130 printer?

Brother HL-2130 – Factory Reset

1. Turn off the printer.
2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
3. Release GO, all the LEDs will turn off.
4. Press GO ten (10) times. The printer will automatically restart.

What do I do if my Brother printer is in error state?

Restart the Printer and Computer: Restart the Brother Printer and Computer after shutting them down for a couple of minutes and then restart both of them. A simple restart can fix the problem of the Brother Printer error state. Check Paper jams: Check if there is any stuck paper inside the printer tray.

What will happen if I reset my printer?

A factory reset will return your printer’s settings to what they were when it first came out of the box. This guide will help you reset your printer back to factory defaults.

How do I know if my printer needs reset?

SIGNS THAT YOUR PRINTER NEEDS RESETTING You will see a message that says “Waste ink pad is full“ or something like that. The pink/pinkish button beside the power button is constantly blinking. The pink/pinkish button beside the power button has a steady light (indication of error).

Why is my printer not printing right?

The heads, nozzles and other components of the printer can become dirty or clogged, leading to issues with quality, such as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.

Why is my Brother printer not working?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.

What is Brother printer default password?

The default password for most of the models of brother printer is “access”. 7. You can also use Web-Based Management or BR Admin Light to change this password.