How To Reset Replace Toner In Brother Printer? (Solution)

Reset process

  1. Switch-off the printer.
  2. Open the front cover.
  3. Press and Hold the Go button while all the LEDs on the printer’s control panel light-on.
  4. Release the Go button.
  5. Press Go twice.
  6. Press Go 6 times if you want to reset Brother TN-2110 toner cartridge.

How do I reset my Brother printer after changing toner?

To reset the ‘Toner Life End’ / ‘Replace Toner’ message on Brother DCP, MFC and HL colour printers:

  1. With the printer powered on, open the toner access door.
  2. Press the ‘Clear/Back’ button to get to the ‘Reset Menu’
  3. At the Reset Menu you can then scroll through the reset options for your printer’s toner cartridges.

How do I get my Brother printer to recognize toner cartridges?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

How do I reset my brother tn 420 toner?

Press the “Go” button 2 times – The “Toner, Drum, and Error” LEDs will turn ON. Press the “Go” button 6 times for a TN420 or Press the “Go” button 7 times for Brother TN450. Close the front cover after “Error” LED starts to flash. Finally, The reset procedure has been completed.

You might be interested:  What Kind Of Usb Cable Do I Need For My Brother Printer? (Solution found)

How do you trick a Brother printer toner?

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your Brother toner cartridge.

How do you reset the toner on a brother mfc 7360N printer?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

Why is my Brother printer not printing after changing toner?

Your Brother printer will display the “no toner” message if the printer’s drum unit assembly or your toner cartridge was installed incorrectly. So if your Brother printer does not detect toner, you need to uninstall and reinstall the drum unit assembly and toner cartridge to rectify the problem.

Why does my Brother printer keep saying no toner?

The message ‘No Toner’ indicates that the toner cartridge or the toner cartridge and drum unit are not installed correctly. Remove the toner cartridge from the drum by holding down the green lock lever on the left side of the drum unit and lifting the toner out. Handle the toner cartridge carefully.

How do I factory reset my Brother printer?

Press the Up arrow key select Reset.

  1. Press the Settings button.
  2. Press All Settings.
  3. Press Initial Setup.
  4. Press Reset.
  5. Press All Settings or Factory Reset (depends on which model you have).
  6. Press Yes.
  7. Press Yes again and hold for two seconds.
You might be interested:  How To Fix The Alignment On Brother Printer Mfc J480dw? (Solved)

How do I reset my Brother HL L2305W?

Brother HL-L2305W Toner reset Procedure Hold the ‘GO’ button down while turning the printer on. After 3 seconds release the ‘GO’ button. “USER MODE” will appear. Press the “GO” button NINE times.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]