How To Reset Drum Counter On Brother Printer Mfc 7860dw? (Solution)

How to reset the drum counter:

  1. Make sure the printer is on, then open the front cover and push “clear” button.
  2. Press “1” to confirm you are installing a new drum.
  3. When the screen says “Accepted”, close the front cover and you can now start printing!

How do you reset the drum counter on a Brother printer MFC?

To reset the drum counter:

  1. Press the UP OR DOWN ARROW key to select Machine Info.
  2. Press the UP OR DOWN ARROW key to select Reset Parts Life.
  3. Press the UP OR DOWN ARROW key to select Drum Unit.
  4. Press the UP ARROW key to reset the drum unit counter.
  5. The display will show ‘Accepted’ and the machine will return to ‘Ready’.

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.
You might be interested:  What Brother Printer Uses Lc61 Ink? (Perfect answer)

Why does my Brother printer keep saying drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum counter on a Brother MFC L3770CDW?

Reset the Drum Counter (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW)

  1. Make sure the machine is turned on.
  2. Press and hold for about five seconds.
  3. Press [Drum].
  4. Select the toner color for the drum unit you just replaced.
  5. Press [Yes].

How do you reset the drum counter on a Brother MFC L2710DW?

How to reset the drum counter:

  1. The printer should be on.
  2. Close the front of the printer.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Press the “up” arrow to reset the counter.

How do you reset the page counter on a Brother printer?

Open the top cover of the printer (to access cartridges). With the top cover open, press and hold the now unlit Asterisk (Star) button for 5 seconds. The reset menu will now appear on the LCD display. Scroll through the menu to select a color and yield to reset.

How do you reset a drum counter?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.
You might be interested:  How Do I Set Up A Brother Printer With My Computer? (Solution)

How do you reset the drum on a Brother HL l2320d?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

How do you reset the drum counter on a Brother MFC 9330cdw?

When you replace a drum unit with a new one, you must reset the drum counter by completing the following steps:

  1. Press Cancel to interrupt the error.
  2. Press Settings.
  3. Press All Settings.
  4. Swipe up or down or press the Up or Down arrow key to display Machine Info.
  5. Press Machine Info.
  6. Press Parts Life.

How do you reset the drum on a Brother MFC l5850dw?

Reset the drum counter

  1. Make sure the machine is turned on.
  2. Press (Settings) > All Settings > Machine Info. > Parts Life.
  3. Press and hold Drum Life until the machine’s display message changes.
  4. Press Yes.
  5. Press (Home).

How do you clean a Brother printer drum?

Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

How do I fix the drum error on my Brother MFC 9840CDW?

How to reset the MFC-9840CDW printer when the drum has expired:

  1. In ready mode, press the 3 and 9 button at the same time so that the reset menu appears.
  2. Press the up or down arrow until you get to the drum, then press ok.
  3. Select 1 to reset the drum.
  4. Your printer should now be in the ready state with the drum reset.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]