Reset the settings to factory default

1. Power the machine off.
2. Press down the GO button and power the machine on.
3. Keep pressing GO until the Toner, Drum, and Error LEDs are on. The Ready LED will be off.
4. Release GO. All LEDs will be off.
5. Press GO ten times. Your machine’s printer settings will be reset.

How do I reset my Brother HL-2270DW wireless?

Brother HL-2270DW factory reset

1. Turning the printer off.
2. Holding down the “GO” button and turning the printer on.
3. Keep holding it down until the top three printer lights come on (Toner/Drum/Error)
4. Release the “GO” button.
5. Press the “GO” button six times in succession.

How do I change the wifi on my Brother HL-2270DW?

Configure the wireless settings:

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How do I reset my Brother MFC L2750DW?

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL

1. Press. [Settings]>[All Settings]>[Initial Setup]>[Reset].
2. Press or. to display the type of reset functions, and then press the reset function you want to use.
3. Press the option in the table to reboot the machine or to exit the process. Option.
4. Press.

How do I clear the error on my Brother HL 2270DW?

Hold the GO button and turn off the printer on mode afterward. While the LEDs for toner, drum, and error are turned on and the Ready LED is off, the GO button will have to be released. This will turn off all the LEDs.

Is Brother HL 2270DW a wireless printer?

The Brother HL2270DW steps up its’ level of convenience even more by offering a wireless feature in addition to the other laser printer benefits.

How do I print a network configuration page on a Brother HL 2270DW?

To print the configuration page, press the Go button three times. The printer will whir and the pages should print out shortly.

Can’t connect to Brother printer over WiFi?

Steps to Reset the WiFi Connection on Brother Printer

• Firstly turn on your Brother printer.
• Then press the Menu button on the control panel of the printers.
• Now select Network and press Ok.
• After that select Network Reset and press Ok.
• Press Reset and then select Yes.

How do I connect my Brother printer to a new WiFi?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

How do I reset my wireless printer?

To do this, power down the printer and then unplug the power cord from the wall. Wait for a minute, then plug the printer back in and power it back up. Wait for the cartridges to center, and then try printing again. If your issue persists, you can also try resetting the printer to the default or factory settings.

How do I reset my Brother printer password?

VIA A WEB BROWSER

1. Connect to the printer using a web browser.
2. Click the “Network Configuration” page.
3. Enter the print server password (The default password is “access”).
4. Click the ‘Change Password’, ‘Configure Password’ or ‘Password & Contact’ link.
5. Enter the new password details.

How do I reset the Brother machine to factory default settings?

Use the following steps to reset the machine:

1. Unplug the interface cable if selecting Network or All Settings.
2. Press Menu.
3. Press the UP OR DOWN ARROW key to choose Initial Setup.
4. Press the UP OR DOWN ARROW key to choose Reset.
5. Press the UP OR DOWN ARROW key to choose the reset function you want to use.

How do I reset my Brother HL L2370dw printer?

How to Reset Drum on Brother HL-L2370dw

1. Make sure the printer is on.
2. Close the front cover.
3. Hold down the “OK” button and the “up” arrow at the same time.
4. Press the “OK” button to select “Drum”.
5. Select the “down” button to reset the drum counter.
6. The printer will say accepted when drum is reset.