How To Replace Drum Unit Brother Printer? (Solution found)

Replacing the drum unit

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do I reset my Brother printer after replacing drum?

To reset the drum counter:

  1. Press the UP OR DOWN ARROW key to select Machine Info.
  2. Press the UP OR DOWN ARROW key to select Reset Parts Life.
  3. Press the UP OR DOWN ARROW key to select Drum Unit.
  4. Press the UP ARROW key to reset the drum unit counter.
  5. The display will show ‘Accepted’ and the machine will return to ‘Ready’.
You might be interested:  Why Is Brother Printer Squeking? (TOP 5 Tips)

How do I know if my brother drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

How do you install a brother drum unit?

How to replace or install the drum unit

  1. Make sure the machine is turned on and open the front cover.
  2. Remove the toner and drum assembly from the machine.
  3. Push down the green lock lever and take the toner out of the drum.
  4. Unpack the new drum unit.
  5. Insert the toner in the drum.

How long should a drum last on a Brother printer?

The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.

What happens if I don’t replace printer drum?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

What are the signs that a printer drum needs to be replaced?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

You might be interested:  How To Adjust Hte Color On A Brother Printer? (Best solution)

Is drum different than toner?

The Difference Between Toner and Drum The laser in a laser printer eteches an electrically charged image onto the surface of the drum. Toner particles stick to the printer drum. The printing drum turns and transfers the toner — and image — to the paper.

How do you replace the drum on a brother mfc 7360n?

How to replace the drum

  1. Turn on the printer.
  2. Open the front cover and let the printer sit for ten minutes so it can cool down.
  3. Remove the drum unit and toner cartridge from the printer.
  4. Separate the toner cartridge from the drum unit by pressing down on the green lever.
  5. Open up your new drum unit.

Can you clean a printer drum?

Look for chunks of toner on the drum unit. After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.

How do you check the drum life on a Brother printer?

Can I check the remaining life of my Brother machine’s drum?

  1. Press MENU and choose Machine Info. => Drum Life.
  2. Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
  3. Press the STOP/EXIT key.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]