How To Remove Brother Change Drum Nitification From My Printer? (Question)

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do I get rid of the Replace drum message on my Brother printer?

How do I clear the message ‘Replace Drum’?

  1. Make sure that the machine is turned on.
  2. Press the cover release button and then open the front cover.
  3. Remove the old drum unit and toner cartridge assembly.
  4. Hold down the green lock lever on the left and pull the toner cartridge out of the drum unit.

Why does my Brother printer keep telling me to replace the drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

You might be interested:  How To Hook Up My Brother Hl-l2380 Laser Printer? (Correct answer)

How do I clear my drum End Soon message?

How do I clear the message ‘ Drum End Soon ‘ from the display?

  1. Open the front cover.
  2. Press the CLEAR key.
  3. Press the UP ARROW key to select YES.
  4. Close the front cover.
  5. Confirm the display or status monitor message is no longer there.

How do you reset change drum soon on Brother?

To reset the drum counter follow these steps:

  1. Open the front cover.
  2. Press the CLEAR key.
  3. Press 1 to reset.
  4. Close the front cover, pressing firmly on each side until they click into place.

How do you clean a Brother printer drum?

Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

How do you reset the drum on a Brother HL l2370dw?

How to reset the drum counter:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

What happens if you don’t replace the drum in a printer?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

You might be interested:  Why Is My Brother Printer Always Offline? (Best solution)

How do you reset the drum on a Brother printer MFC L2750DW?

MFC-L2750DW DRUM reset

  1. Make sure the machine is turned ON.
  2. Close the front cover.
  3. Press. (Cancel).
  4. Press and hold. Toner (The toner icon is on the bottom right hand side of the LCD screen.) for FIVE seconds.
  5. Reset Drum will appear in the LED Screen.
  6. Tap Drum, and then press Yes.

How do you reset the drum on a Brother printer HL L5100DN?

HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
  4. Press for [Reset] to reset the drum counter.
  5. Close the front cover of the machine.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]