How To Print A Test Page From The Printer Brother Hl-l2300d?

How do I print a Test page?

  1. Turn off the printer.
  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Error LEDs light up.
  4. Press the Go button again.

How do I manually print on my Brother printer?

Use both hands to slide the manual feed slot paper guides to fit the width of the paper you are using. Using both hands, put one full sheet of paper or one envelope in the manual feed slot until the front edge touches the paper feed roller. When you feel the machine pull it in, let go. The document will be printed out.

Why is my printer connected but not printing brother?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.

You might be interested:  How Thick Paper Can A Brother Laser Printer?

How do I print a test page from my Brother printer?

How do I print a Test page?

  1. Turn off the printer.
  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down Go as you turn on the power switch. Keep Go pressed down until the Back Cover, Toner, Drum and Paper LEDs light up. Release Go.
  4. Press Go again. The printer will print a test page.

Why won’t my Brother printer print a test page?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.

Where is the manual feeder?

For additional information on media specifications, refer to Paper and Paper Tray Specifications. Press to open the manual feed slot, located on the front of the printer. Note: The manual feed slot holds 1 sheet of the following media: 20 lb (80 gsm) plain paper, transparency, label, envelope or cardstock.

How do you open a brother paper tray?

Close the output paper tray cover. Slowly push the paper tray completely into the machine. While holding the paper tray in place, pull out the paper support (1) until it clicks, and then unfold the paper support flap (2).

How do I print a manual feed?

Printing using manual feed

  1. Make sure that the product is idle and the Ready light is on.
  2. Access the product Properties dialog box.
  3. Click the Paper/Quality tab.
  4. Select Manual Feed from the Source is drop-down list.
  5. Load paper or an envelope into the priority feed slot, depending on the print job.
You might be interested:  How To Remotely Make Brother Printer Online? (Correct answer)

How do I check my Brother printer toner levels?

How To Check Toner Level on Brother Printer

  1. Double-click on your printer icon (it’s down in the task tray) to open the Brother Status Monitor Utility.
  2. Your ink and toner levels will be displayed.

How can I tell if my toner is empty?

When ink cartridges and ink toners are low, it is often easy to tell by looking at the quality of the print job they’re doing. For the most part, when toner is low you’ll be looking for horizontal streaks across your images and words, but sometimes they can be vertical as well.

How do I check the status of my Brother printer?

Run System Preferences, choose Printers & Scanners, and then choose the machine. Click Options Supplies. Click the Utility tab, and then click Open Printer Utility. The Status Monitor will start up.

How do I fix the check connection on my Brother printer?

How to fix Brother Printer Error Check Connection

  1. To resolve the issue of ‘Check Connection’ error message, Brother recommends uninstalling and restarting the system and then reinstalling the application.
  2. Try to scan a document using the ‘Scan’ option from the Control Center software.

How do I get my Brother printer to print wirelessly?

Press and hold the Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button. Connect the printer to the computer with a USB cable. Start the Printer Setting Tool on the computer, and click [Communication Settings].

You might be interested:  How To Change The Dpi On A Brother Printer Scanner? (Question)

Why does my printer say offline?

If your printer is showing an offline message, it means it’s having a hard time communicating with your computer. There can be a number of reasons for this, from connectivity issues to a fault with your printer. Whatever the reason, there are several checks you can do to determine which issue you’re facing.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]