How To Load Paper In Brother Printer Hl-l2360dw? (Question)

Load paper in the paper tray

  1. Pull the paper tray completely out of the machine.
  2. Adjust the tray length if needed:
  3. Press and slide the paper guides to fit the paper.
  4. Fan the stack of paper well.
  5. Load paper with the printing surface face down in the paper tray.
  6. Make sure the paper is below the maximum paper mark.

Why is my Brother printer not picking up paper?

Cause 1: The photo bypass tray is located at the wrong position. Cause 4: Paper dust has accumulated on the surface of the paper pick-up rollers. Cause 6: The paper tray was not fully inserted. NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

Where is the paper tray on a printer?

Paper is housed in the printer’s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper. Within the paper tray, you will notice a guide that can be adjusted to fit your preferred paper length.

You might be interested:  How To Check Brother Printer Ink Levels? (Correct answer)

How do I load paper into my Brother HL l2370dw?

Load Paper in the Paper Tray

  1. Pull the paper tray completely out of the machine.
  2. Press and slide the paper guides to fit the paper.
  3. Fan the stack of paper well.
  4. Load paper in the paper tray with the printing surface face down.
  5. Make sure the paper is below the maximum paper mark ( ).

How do I manually put paper in my printer?

Printing using manual feed

  1. Make sure that the product is idle and the Ready light is on.
  2. Access the product Properties dialog box.
  3. Click the Paper/Quality tab.
  4. Select Manual Feed from the Source is drop-down list.
  5. Load paper or an envelope into the priority feed slot, depending on the print job.

Why does my printer keep saying no paper when there is paper?

The paper might not be engaged with the feed rollers. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.

Why does my printer keep saying no paper fed?

– The machine is out of paper. – Paper is not loaded properly in the paper tray. – The paper tray is not completely inserted into the machine. – The machine’s rear cover is not installed properly.

What does no paper feed mean?

“No Paper Fed [MP Tray]” will occur when your machine is trying to print from the MP Tray but the paper isn’t loaded, or the paper can’t be pulled through.

You might be interested:  How To Remotely Make Brother Printer Online? (Correct answer)

How do you put the paper in a Brother fax machine?

Press the Up or Down arrow key to choose Paper and press Menu/Set. Load paper into my Brother machine’s paper tray.

  1. Fan the stack of paper well to avoid jams and misfeeds.
  2. Tap the stack of paper on a hard surface so that its edges are even.
  3. Gently insert the paper into the tray print side down.

How do you load photo paper into a Brother printer?

Load photo paper

  1. Pull the paper tray completely out of the machine.
  2. Open the output paper tray cover (1).
  3. Do one of the following:
  4. Close the output paper tray cover.
  5. Load up to 20 sheets of Photo or Photo L paper in the paper tray print side down.
  6. Open the output paper tray cover (1).

Can you add a tray to Brother printer?

Click the Accessories tab and click Auto Detect. After Tray 2 has been detected, click Apply. – If Auto Detect does not detect the tray, you can manually add it. Under Available Options, select the tray, click Add and then Apply.

Where is the input tray?

The input tray is the tray on the printer that serves as the paper source. The output bin is a bin on the printer where printed jobs are delivered. Users can use the input-tray and output-bin job attributes to specify a tray name, such as 3-hole and a bin name, such as staple.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]