How to setup wireless connection for your Brother MFC L2700DW printer:

1. Turn your Brother MFC L2700dw on.
2. Press the ‘Menu’ button.
3. Select ‘Network’ and press ‘OK’.
4. Select ‘WLAN’ and press ‘OK’.
5. Select ‘Setup Wizard’ and press ‘OK’.
6. Select ‘Yes’ to ‘WLAN Enable?’
7. Select your Network Name (SSID) and press ‘OK’.

•

How do I connect my Brother printer to my wireless network?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

Why is my Brother printer not connecting to WiFi?

Primary Guide to Solve Brother Printer WiFi Connection Problem. First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi- Fi on your Brother printer and then again turn it on. Try to connect your Brother printer to the Wifi using WPS method.

How do I connect my Brother wireless printer without cable?

Press and hold the WiFi button on your machine for about 2 seconds, until the light begins to blink. The WiFi button will light up when connected. You have completed Wireless Setup on your Brother machine.

Why is my WiFi not connecting to my printer?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

How do I know if my Brother printer is connected to WIFI?

Check your machine’s wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report. If your WLAN report is stating “Connection OK”, although you can not scan, refer to “Check the wireless status on the WLAN report” and check “Connection: OK”.

Where is the IP address on a Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

What is an SSID code for Wifi?

The SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. This is viewable to anyone with a wireless device within reachable distance of your network. It’s recommended you set up a password so not just anybody can connect to your network.

What is a WPS WIFI?

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.

Where can I find WPS pin on Brother printer?

Press Network. Press WLAN. to display WPS w/PIN Code, and then press WPS w/PIN Code. The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.