Set up the wireless connection manually with the printer driver installed (For Windows)

1. Make sure that the printer driver, Printer Setting Tool, and P-touch Editor are installed on your computer.
2. Turn on the printer.
3. Make sure the printer’s Wi-Fi LED is flashing.
4. Connect the printer to the computer with a USB cable.

•

How do I connect my Brother printer wirelessly without the CD?

Turn on your computer if it isn’t already on. You should already have installed the printer drivers. Open the printer network driver and select the configure option, choosing the “Brother Peer-to-Peer Network.” Connect the USB cable to the printer and computer.

How do I setup my Brother HL 2270dw wireless without CD?

Configure the wireless settings:

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How do I get my Brother printer to recognize my computer?

Do the following steps to solve the problem:

1. Check the status of your Brother machine.
2. Check the connection of your Brother machine and the computer.
3. Check the printer driver settings.
4. Try printing from another application.
5. Restart your Brother machine and the computer.
6. Reinstall the printer driver.

How do I connect my Brother printer to my computer wirelessly?

Set up the wireless connection manually with the printer driver installed (For Windows)

1. Make sure that the printer driver, Printer Setting Tool, and P-touch Editor are installed on your computer.
2. Turn on the printer.
3. Make sure the printer’s Wi-Fi LED is flashing.
4. Connect the printer to the computer with a USB cable.

How do I print wirelessly to my Brother printer?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

Why can’t My Brother printer find my WiFi?

First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Now try to connect your Brother printer to the WiFi now. Try to connect your Brother printer to the Wifi using WPS method.

How can I connect my laptop to my printer without the CD?

Connect Via USB

1. Make sure the printer and computer are both plugged in and ready to go.
2. Turn on the computer, but leave the printer off.
3. When the computer has fully started up, connect the printer with a USB cable, then turn on the printer.

Why is my computer not connecting to my printer?

Many computer connectivity issues are caused by something as simple as a loose cable. Make sure all of the cables connecting your computer to your printer are fully in place and completely fastened at both ends. If your printer is not turning on, the power cord could also be an issue.

Where is the IP address on a Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

What is WIFI Direct Printing Brother?

Wi-Fi Direct is a wireless configuration method developed by the Wi-Fi Alliance. It allows you to directly configure a secured wireless network between your Brother machine and a mobile device (without an access point/ router). You can also configure a wireless network by manually setting an SSID and password.

Where can I find WPS pin on Brother printer?

Press Network. Press WLAN. to display WPS w/PIN Code, and then press WPS w/PIN Code. The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.

How do you connect a computer to a wireless printer?

How to connect your printer

1. Open Windows search by pressing Windows Key + Q.
2. Type in “printer.” Source: Windows Central.
3. Select Printers & Scanners.
4. Turn on the printer.
5. Refer to the manual to connect it to your Wi-Fi network.
6. Hit Add a printer or scanner.
7. Select the printer from the results.
8. Click Add device.