To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

•

Why is my Brother printer not connecting to WiFi?

Primary Guide to Solve Brother Printer WiFi Connection Problem. First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi- Fi on your Brother printer and then again turn it on. Try to connect your Brother printer to the Wifi using WPS method.

How do I know if my Brother printer is connected to WIFI?

Check your machine’s wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report. If your WLAN report is stating “Connection OK”, although you can not scan, refer to “Check the wireless status on the WLAN report” and check “Connection: OK”.

Why is my WiFi not connecting to my printer?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

How do I get my router to recognize my printer?

This error usually occurs if the printer or the router configurations are corrupted. Why won’t my printer recognize my router?

1. Press the Wireless button and the Cancel button from the printer Control Panel simultaneously and hold them from about 5 seconds.
2. This should reset the printer to network default.

What are two methods to connect to a printer wirelessly?

There are three main ways to connect your printer into your Wi-Fi network: using Wi-Fi Protected Setup (WPS), using the printer’s onboard Wireless Setup Wizard, or by connecting your printer to your computer via USB and using the supplied software to configure the wireless connection.

What is a WPS button on printer?

Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

How do I connect my Brother wireless printer without cable?

Press and hold the WiFi button on your machine for about 2 seconds, until the light begins to blink. The WiFi button will light up when connected. You have completed Wireless Setup on your Brother machine.

How do I make my Brother printer discoverable?

Configure the wireless settings:

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How do I get my Brother printer to print wirelessly?

Press and hold the Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button. Connect the printer to the computer with a USB cable. Start the Printer Setting Tool on the computer, and click [Communication Settings].

How do I connect my Brother HL L2350DW to WIFI?

Turn on your Brother HL-L2350DW printer. Use the arrow button key on the printer’s control panel to select “Network” and press OK. Use the arrow button key on the printer’s control panel to select “WLAN” and press OK. Use the arrow button key on the printer’s control panel to select “ Setup Wizard ” and press OK.