To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press the Up or Down arrow key to select the Network option and press OK.
3. Press the Up or Down arrow key to select the WLAN option and press OK.

•

How do I reset my Brother HL l2340dw WiFi?

FAQs & Troubleshooting

1. Press the Up or Down arrow key (+ or -) to choose the Network option, and then press OK.
2. Press the UP or Down arrow key (+ or -) to choose the Network Reset option, and then press OK. Press the Up arrow key (+).
3. Press the Up arrow (+) for Yes. The machine will restart.

How do I get my Brother printer to automatically connect to WiFi?

Configure the wireless settings:

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

Why can’t My Brother printer find my WiFi?

First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Now try to connect your Brother printer to the WiFi now. Try to connect your Brother printer to the Wifi using WPS method.

How do I connect my Big Brother printer to WiFi?

2.2 Set up the Brother machine

1. Press Menu button on the machine’s control panel.
2. Press the Up or Down arrow key to select Network and press OK.
3. Press the Up or Down arrow key to select WLAN and press OK.
4. Press the Up or Down arrow key to select Setup Wizard and press OK.
5. When WLAN Enable?

How do I connect my Brother wireless printer without cable?

Press and hold the WiFi button on your machine for about 2 seconds, until the light begins to blink. The WiFi button will light up when connected. You have completed Wireless Setup on your Brother machine.

How do I know if my Brother printer is connected to WiFi?

Check your machine’s wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report. If your WLAN report is stating “Connection OK”, although you can not scan, refer to “Check the wireless status on the WLAN report” and check “Connection: OK”.

Is network key same as password?

Luckily, it’s not as confusing as it sounds — your network security key is essentially just your Wi-Fi password. A network security key is a specific type of password that allows your Wi-Fi router to talk to the device you’re using, and allows you to use the internet securely.

What is WPS on Brother printer?

If your wireless access point supports WPS (Wi-Fi Protected Setup™), you can configure the printer easily without a computer. By pushing a button on the wireless access point/router, you can setup the wireless network and security settings.

How do I get my Brother printer to print wirelessly?

Press and hold the Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button. Connect the printer to the computer with a USB cable. Start the Printer Setting Tool on the computer, and click [Communication Settings].

What is an SSID code for Wifi?

The SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. This is viewable to anyone with a wireless device within reachable distance of your network. It’s recommended you set up a password so not just anybody can connect to your network.

Where is the IP address on a Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

How do I connect my Brother HL L2350DW to WIFI?

Turn on your Brother HL-L2350DW printer. Use the arrow button key on the printer’s control panel to select “Network” and press OK. Use the arrow button key on the printer’s control panel to select “WLAN” and press OK. Use the arrow button key on the printer’s control panel to select “Setup Wizard” and press OK.

What is SSID number?

Android. From the Apps menu, select “Settings”. Select “Wi-Fi”. Within the list of networks, look for the network name listed next to “Connected”. This is your network’s SSID.