How To Change The Drum In Brother Printer Mfc 9340? (Solution)
Open the top cover until it locks in the open position. Take out the toner cartridge and drum unit assembly for the color shown on the machine’s display. Push down the green lock lever and take the toner cartridge out of the drum unit. Unpack the new drum unit, and pull off the protective cover.
Contents
- 1 How do you reset the drum on a Brother MFC 9340?
- 2 How do I change the drum on a Brother printer?
- 3 Why does my Brother printer keep saying replace drum?
- 4 How do you reset the drum counter on a Brother MFC?
- 5 How do you reset the drum on MFC?
- 6 Where is the drum on a Brother MFC?
- 7 How do you change the drum on a Brother MFC 7420?
- 8 How do I know if my printer drum is bad?
- 9 Can printer drums be cleaned?
- 10 How do you change the drum unit on a Brother MFC 9970cdw?
- 11 How do you replace the drum on a brother mfc 7360N?
How do you reset the drum on a Brother MFC 9340?
Brother MFC-9340CDW – Reset Drum
- Press “X” to clear the error message.
- Press the tools button (picture of a spanner).
- Press “All Settings”.
- Press “Machine Info”.
- Press “Parts Life”.
- Press “#” until the touch screen message changes.
- Press the colour of the drum that was replaced.
- Press “Yes”.
How do I change the drum on a Brother printer?
How to replace or install the drum unit
- Make sure the machine is turned on and open the front cover.
- Remove the toner and drum assembly from the machine.
- Push down the green lock lever and take the toner out of the drum.
- Unpack the new drum unit.
- Insert the toner in the drum.
Why does my Brother printer keep saying replace drum?
The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
How do you reset the drum counter on a Brother MFC?
Reset the Drum Counter
- Close the front cover.
- Make sure the machine is turned on.
- Press. (Settings).
- Press All Settings. (This step might be skipped in some models.)
- Choose Machine Info. or Machine Information => Parts Life.
- Press and hold Drum or Drum Life until the machine’s display message changes.
- Press Yes.
- Press.
How do you reset the drum on MFC?
Reset Drum for Brother MFC-L2710DW
- Make sure the machine is turned on.
- Close the front cover.
- Press OK and the Up arrow key at the same time.
- Press OK to select Drum.
- Press the Up arrow key to reset the drum counter.
Where is the drum on a Brother MFC?
For Brother printers, the drum unit is usually connected to the toner cartridge. 1. To find it, simply open the front flap of your laser printer and find the toner cartridge(s) which the drum unit will be attached to or beneath.
How do you change the drum on a Brother MFC 7420?
Replace the drum unit.
- Open the front cover and pull out the drum unit and toner cartridge assembly.
- Hold down the lock lever on the left and pull the toner cartridge out of the drum unit.
- Unpack the new drum unit.
- Reinstall the toner cartridge into the new drum unit.
How do I know if my printer drum is bad?
The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.
Can printer drums be cleaned?
After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.
How do you change the drum unit on a Brother MFC 9970cdw?
Replace Drum
- Make sure that the machine is turned on.
- Press the front cover release button and then open the front cover.
- Hold the green handle of the drum unit.
- Turn the green lock lever (1) at the left of the machine counterclockwise to the release position.
- Unpack the new drum unit and remove the protective cover.
How do you replace the drum on a brother mfc 7360N?
How to replace the drum
- Turn on the printer.
- Open the front cover and let the printer sit for ten minutes so it can cool down.
- Remove the drum unit and toner cartridge from the printer.
- Separate the toner cartridge from the drum unit by pressing down on the green lever.
- Open up your new drum unit.