How To Change Printer Cartridge Brother Mfc 240c? (TOP 5 Tips)

How To Replace Cartridge(s)

  1. Open the cartridge cover of your Brother MFC 240C. Refer to its LCD screen to know which cartridge color that you need to replace.
  2. Release the empty cartridge by pushing its lock release lever.
  3. Put the new cartridge in.
  4. Pull up the lock release lever and close the cartridge cover.

How do I change the ink cartridge in my Brother printer?

How do I replace the Ink Cartridge?

  1. Open the ink cartridge cover.
  2. Pull the lock release lever down and take out the ink cartridge for the color shown on the LCD.
  3. Open the new ink cartridge bag for the color shown on the LCD, and then take out the ink cartridge.
  4. Remove the protective yellow cap.

How do you reset the ink cartridge on a Brother printer?

Method 2

  1. Turn your Brother printer on and open the toner door.
  2. Now, Press the “Clear/Back” button on the printer to access the Reset Menu.
  3. Futher, Use the arrow keys to scroll through the printer’s toner cartridge reset options.
  4. Now, Press “1” to reset the ink cartridge and then press “Clear/Back” to quit the menu.
You might be interested:  How To Print To Brother Printer From Email? (Solution found)

Why does my brother Printer not recognize my ink cartridge?

Check that the machine power is turned ON and install the ink cartridges. If the machine is powered-off, it cannot detect when the ink cartridges are installed. Each colour has its own correct position – match the colour of the cartridges with the colour of the levers. Reinstall the ink cartridges one at a time.

Where is the ink cartridge on a Brother printer?

– The ink cartridge cover is located on the right side of your machine. 2. Press the lock-release lever to release the ink cartridge indicated on your machine’s display.

Is ink and toner the same thing?

In a nutshell, ink cartridges contain liquid and are used by inkjet printers and toner cartridges contain powder and are used by laser printers. Toner is a dry powdery substance that won’t stain like an ink cartridges, but it can get messy if handled improperly.

How do I force my Brother printer to print with low ink?

Basically, your Brother machine is designed to stop ALL printing operations when any of the ink cartridges are empty.

  1. Open the Print dialog.
  2. Choose Print Settings in the Print dialog box.
  3. Choose Plain Paper in Media Type.
  4. Choose Greyscale in Colour/Greyscale.

How do I get my printer to recognize ink cartridges?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

You might be interested:  How To Setup Wifi On A Brother Printer? (Solution)

Is there a reset button on ink cartridges?

After removing the printer cartridges, examine the end of a cartridge where the copper contacts are found. On some models, there is a reset button located above the contacts in the center. After resetting each cartridge, you can then replace them and the printer should accept them as if they were new.

How do I know if my brother ink cartridge is empty?

1. Check the ink status from the control panel

  1. Press Menu.
  2. Press the Up or Down arrow key or the dial pad to select Ink or Ink Management and press OK.
  3. Press the Up or Down arrow key or the dial pad to select Ink Volume and press OK.
  4. Press Stop/Exit.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]