How To Change Paper In A Brother Printer?

Pull the paper tray completely out of the machine. Press and slide the paper guides to fit the paper. Press the green release levers to slide the paper guides. For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray and then pull out the back of the paper tray.

How do you put paper in a Brother printer label?

Put paper in the tray and make sure:

  1. – The paper is below the maximum paper mark. The maximum paper mark is located on the right paper guide and marked with 3 red down arrows.
  2. – The side to be printed on must be face down.
  3. – The paper guides touch the sides of the paper so it will feed properly.

How do you open the paper tray on a Brother printer?

How to load the paper tray

  1. If the paper support flap (1) is open, and then close the paper support (2).
  2. Pull the paper tray completely out of the machine.
  3. Open the output paper tray cover (1).
  4. Gently press and slide the paper width guides (1) and paper length guide (2) to fit the paper you’re loading.
You might be interested:  How To Connect To A Brother Printer Wirelessly?

How do I change the paper tray when printing?

NOTE: The steps may differ depending on your application.

  1. From within your application, click File => Print.
  2. Click Properties.
  3. Click on the Basic tab.
  4. In the Paper Source dropdown choose the Tray that you want to print from.
  5. Click Apply => OK.
  6. Click OK or PRINT, depending on your application.

Where is the paper tray on a printer?

Paper is housed in the printer’s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper. Within the paper tray, you will notice a guide that can be adjusted to fit your preferred paper length.

How do I manually put paper in my printer?

Printing using manual feed

  1. Make sure that the product is idle and the Ready light is on.
  2. Access the product Properties dialog box.
  3. Click the Paper/Quality tab.
  4. Select Manual Feed from the Source is drop-down list.
  5. Load paper or an envelope into the priority feed slot, depending on the print job.

How do you put paper in a Brother TN 630?

Load paper in the paper tray

  1. Pull the paper tray completely out of the machine.
  2. Adjust the tray length if needed:
  3. Press and slide the paper guides to fit the paper.
  4. Fan the stack of paper well.
  5. Load paper with the printing surface face down in the paper tray.
  6. Make sure the paper is below the maximum paper mark.
You might be interested:  How To Configure Brother Mfc-7840w Wireless Printer? (Solved)

How do you remove a paper tray?

To remove the paper tray:

  1. Open the paper tray and remove any paper.
  2. Pick up the front of the tray, pull it out slightly, and lower the tray back down so it is level.
  3. Pull the right side of paper tray out. Move the paper tray to the right and take the tray out of the machine.

Can you add a tray to Brother printer?

Click the Accessories tab and click Auto Detect. After Tray 2 has been detected, click Apply. – If Auto Detect does not detect the tray, you can manually add it. Under Available Options, select the tray, click Add and then Apply.

How do you put the paper in a Brother fax machine?

Press the Up or Down arrow key to choose Paper and press Menu/Set. Load paper into my Brother machine’s paper tray.

  1. Fan the stack of paper well to avoid jams and misfeeds.
  2. Tap the stack of paper on a hard surface so that its edges are even.
  3. Gently insert the paper into the tray print side down.

How do I change my printer from Tray 1 to Tray 2?

Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.

How do I change the default paper tray?

Change your Default Printer Tray Assignments

  1. Click on File | Page Setup.
  2. Click on the Paper Source tab.
  3. Make your printer tray selections.
  4. Click the Default button to change the Default tray assignments.

How do I get my printer to print from the photo tray?

Adjust the print settings in the app or operating system you are printing from to use the photo paper tray. Figure: Print settings in the Windows 10 Photos app

  1. Open the photo in the app, click the menu icon, and then click Print.
  2. Select the following settings for the print job: Source: Select Photo Tray.
  3. Click Print.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]