1. Press Stop/Exit to interrupt the error temporarily.
2. Press Menu.
3. Press the Up or Down arrow key to display Machine Info.. Press Machine Info..
4. Press Reset Menu.
5. Press Drum.
6. The machine will display Reset Drum?.
7. Press Yes, and then press Stop/Exit.

How do you override a drum on a Brother printer?

FAQs & Troubleshooting

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do you clear a Brother drum error?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Press and hold OK for 2 seconds.
4. Press the Up arrow key or 1 to reset the drum counter.
5. Close the front cover.

Why does my Brother printer keep telling me to replace the drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do I clear the message drum Error Slide the Green tab?

How to clear error message “Slide the Green tab on Drum Unit”?

1. Take out the drum unit and toner assembly.
2. Clean the electrodes with a soft cloth.
3. Gently slide the green tab from side to side several times, and return it to the home position at the far left.
4. Re-install the drum unit.

How do I reset the drum end on my Brother printer?

“Drum End Soon” message

1. Open the front cover.
2. Hold down Ok until Drum Unit is displayed, and then press Ok.
3. Press ▲ to reset. Machine will display Accepted.
4. Close the front cover.

How do you reset the drum on a Brother HL l2320d?

How to reset the drum counter:

1. Open the front cover.
2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
3. Close the front cover.
4. The Drum LED should now be off.

How do you reset the drum on a Brother HL l2370dw?

How to reset the drum counter:

1. Make sure the machine is on.
2. Close up the front cover.
3. Hold down the “OK” button and the “up” arrow at the same time.
4. Press the “OK” button to select “Drum”.
5. Select the “down” button to reset the drum counter.

How do you reset the drum on a Brother printer mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

What happens if you don’t replace the drum in a printer?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

How long should a drum last on a Brother printer?

The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.

What is drum on Brother printer?

What is the drum unit? The drum unit transfers the toner to the paper. To keep good print quality, the Brother machine detects the quality deterioration of the drum unit automatically. If the Brother machine displays “Replace drum” error message, you need to replace the drum unit.

How do I clean the drum on my Brother printer?

Clean the roller by gently wiping the entire surface of the drum with an alcohol swab, such as a medical pad or wipe, or cotton swab lightly moistened with isopropyl alcohol (91% strength alcohol is preferred, but 70 75% strength alcohol is also acceptable).

How do you reset the drum counter on a Brother MFC 9330cdw?

When you replace a drum unit with a new one, you must reset the drum counter by completing the following steps:

1. Press Cancel to interrupt the error.
2. Press Settings.
3. Press All Settings.
4. Swipe up or down or press the Up or Down arrow key to display Machine Info.
5. Press Machine Info.
6. Press Parts Life.

Why does my Brother printer keep saying Slide the green tab?

The message ‘Drum Error, Slide the Green Tab on the Drum Unit’ will appear when the corona wire on the drum unit needs to be cleaned. 1. Clean the corona wire inside the drum unit for all four colors.