Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information = Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

What does drum stop Mean on a brother printer?

• The Brother machine will display a ‘Replace Drum‘ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do I reset my printer drum?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Press and hold OK for 2 seconds.
4. Press the Up arrow key or 1 to reset the drum counter.
5. Close the front cover.

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you fix a drum on a Brother printer?

Reset the drum counter

1. Make sure the machine is turned on.
2. Open the front cover.
3. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
4. Press the Up arrow key to reset the drum counter.
5. Close the front cover of the machine.

How do you reset the drum life on a Brother printer MFC L2710DW?

Reset Drum for Brother MFC-L2710DW

1. Make sure the machine is turned on.
2. Close the front cover.
3. Press OK and the Up arrow key at the same time.
4. Press OK to select Drum.
5. Press the Up arrow key to reset the drum counter.

How do you reset the drum on a Brother HL l2320d?

How to reset the drum counter:

1. Open the front cover.
2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
3. Close the front cover.
4. The Drum LED should now be off.

How do you reset the drum on a Brother MFC?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

What happens if you don’t replace the drum in a printer?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

How do you reset the drum counter on a brother mfc 7460DN?

How to: Reset Toner Counter on Brother MFC-7460DN

1. Open the front panel.
2. Press the Clear/Back button. The display will show: REPLACE DRUM? Yes 2. No.
3. Ignore the display, and type *00 on the keypad. You should see accepted on the display.
4. Close the front panel, and you should be good to go.

How do you reset the drum on a Brother printer MFC l2740dw?

How to reset the drum counter:

1. Press the “X” on the printer to display to interrupt the “replace drum” message.
2. Press the tool button (settings) > All Settings > Machine Info. > Parts Life.
3. Hold down the # button until the LCD message changes.
4. Press “Drum” and then select “Yes”
5. Select the home button.

How do I reset my Brother MFC l2710dw printer?

Make sure your printer is on

1. Open front cover of printer (to reveal the cartridge mechanism) and “Front Door Open” will flash on the display.
2. Next, press STOP/EXIT and CLEAR at the SAME TIME (one quick press)
3. Immediately after, press CLEAR once again.
4. A menu called RESET MENU will appear.