How Do You Reset The Drum Light On A Brother Printer?

Drum Stop

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.
You might be interested:  How To Lower Print Resolution When Printing On Brother Printer? (Best solution)

Why does my Brother printer keep saying drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do I reset my printer after replacing drums?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do you reset the drum on a Brother printer mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do I fix the drum error on my Brother printer?

Drum Error (Drum!)

  1. The corona wires have become dirty. Clean the corona wires in the drum unit.
  2. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
  3. If the issue still continues, the drum unit is at the end of its life.

How do I fix the drum on my Brother printer?

When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps:

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
  4. Press the Up arrow key to reset the drum counter.
You might be interested:  How To Print From Usb On Brother Printer? (Question)

How do I clean the drum on my Brother printer?

Clean the roller by gently wiping the entire surface of the drum with an alcohol swab, such as a medical pad or wipe, or cotton swab lightly moistened with isopropyl alcohol (91% strength alcohol is preferred, but 70 75% strength alcohol is also acceptable).

How do you reset the drum on a Brother MFC?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do you reset the drum on a Brother HL l2320d?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

How do you reset the drum on a Brother printer HL 2240?

Brother HL-2240 – Reset Drum Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.

How do you reset the drum life on a Brother MFC 7340?

How to Reset Toner Low Message on Brother MFC-7340

  1. With your printer ON, open the front door (cover)
  2. Press Clear/Back Button once.
  3. Press *00 (*zero zero)
  4. The message on the display should now read Accepted.
  5. Close the front cover.
  6. Your toner is now reset.
You might be interested:  How Do You Reset Password On A Brother Hl5470dw Printer? (Solution found)

How do you change the drum on a brother mfc 7360n?

How to replace the drum

  1. Turn on the printer.
  2. Open the front cover and let the printer sit for ten minutes so it can cool down.
  3. Remove the drum unit and toner cartridge from the printer.
  4. Separate the toner cartridge from the drum unit by pressing down on the green lever.
  5. Open up your new drum unit.

How do I clean my brother mfc 7360n printer?

Clean the drum unit

  1. Prepare blank A4 or Letter size paper.
  2. Make sure the machine is in Ready mode.
  3. Open the back cover (face-up output tray).
  4. Open the manual feed slot cover.
  5. Press Clear and Menu at the same time.
  6. Using both hands, slide the manual feed paper guides to the width of the paper that you are going to use.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Reset Brother Printer To English Language? (Best solution)

How do I change the Language setting of the printer? Press the [Home] key ( ) to display the Setup menu, select “Settings” using the or key, and then press the [OK] key ( / ) or [Enter] key ( / ). Select ” Language ” using the or key, and then press the [OK] […]