How Do You Reset The Drum Counter On A Brother Dr 420 Printer? (Perfect answer)

Reset DR420 for Brother HL Printer Models

  1. Turn on the printer and replace the drum. Keep the front door open.
  2. Press and hold the Go button for 4 seconds or until all four LEDs light up.
  3. Release the Go button and close the front door.
  4. If the drum light is off, the drum unit is reset.

How do you reset the drum light on a Brother printer?

Drum Stop

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.
You might be interested:  Why Print Slow To Brother Printer? (TOP 5 Tips)

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

Why does my Brother printer keep saying drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum on a Brother DCP l2550dw?

Reset the Drum Counter

  1. Make sure the machine is turned on.
  2. Close the front cover.
  3. Press OK and the Up arrow key at the same time.
  4. Press OK to select Drum.
  5. Press the Up arrow key to reset the drum counter.

How do you reset the drum counter on a Brother HL L2320D?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

How do you reset drum on Brother HL L2320D?

To reset Brother HL-L2300D, HL-L2320D, and HL-L2321D Drum Counter. (1) Make sure that the front cover is open. (2) Press and hold the Go Button for about four seconds until all of the LEDs light up. Once all four LEDs are lit, release Go Button.

You might be interested:  Brother Printer How To Ignore Low Toner? (Correct answer)

How do I reset my printer after replacing drums?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do you reset the drum counter on a brother mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do you reset the drum on a Brother HL l2370dw?

How to reset the drum counter:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

How do I fix the drum error on my Brother printer?

Drum Error (Drum!)

  1. The corona wires have become dirty. Clean the corona wires in the drum unit.
  2. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
  3. If the issue still continues, the drum unit is at the end of its life.

How do I clean the drum on my Brother printer?

Clean the roller by gently wiping the entire surface of the drum with an alcohol swab, such as a medical pad or wipe, or cotton swab lightly moistened with isopropyl alcohol (91% strength alcohol is preferred, but 70 75% strength alcohol is also acceptable).

You might be interested:  How To Clear Printer Spooler Brother Windows 7? (Best solution)

How do I fix the drum on my Brother printer?

When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps:

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
  4. Press the Up arrow key to reset the drum counter.

How do you reset the drum on a Brother DCP l2540dw?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “OK” button for 2 seconds.
  3. Press the “up” arrow button or “1” to reset the drum counter.

How do you reset the drum counter on a Brother MFC 7860dw?

How to reset the drum counter:

  1. Make sure the printer is on, then open the front cover and push “clear” button.
  2. Press “1” to confirm you are installing a new drum.
  3. When the screen says “Accepted”, close the front cover and you can now start printing!

How do I reset my Brother 2550 printer?

Reset Your Brother Machine

  1. Press Menu.
  2. Press or. to display the [Initial Setup] option, and then press OK.
  3. Press or.
  4. Press or.
  5. Press the option in the table to reset the machine or to exit the process.
  6. Press the option in the table to reboot the machine or to exit the process.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]