Hl 2040 Brother Printer How Tochange Toner? (Solved)

Replace the toner cartridge

  1. Open the front cover of the printer.
  2. Pull out the drum unit and toner cartridge assembly.
  3. Push down the blue lock lever and take the toner cartridge out of the drum unit.
  4. Unpack the new toner cartridge.
  5. Pull off the protective cover.

How do you open a Brother HL 2040?

Open the printer’s front cover, then pull out the drum unit and toner cartridge assembly. Place it on a flat, sturdy surface—preferably with a drop cloth or disposable paper to catch any spills. Push down the lock lever and remove the used toner cartridge from the drum unit. Unpack the new toner cartridge.

How do I change my Brother printer toner?

Replace Toner

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new toner cartridge.
  6. Remove the protective cover.

Why is my Brother printer paper light flashing?

The Paper LED flashing can be caused by no paper in the manual feed slot, a paper jam, the front cover is open, the back cover is open, dust on the drum, or not having a drum installed. Be sure that the drum unit and toner cartridge assembly is installed in the machine before continuing.

You might be interested:  How To Reset Brother Printer Wireless Settings 2270dw? (Correct answer)

How do I change my printer toner?

Steps for Replacing Toner

  1. Step 1: Open the front cover.
  2. Step 2: Remove the empty toner cartridge. Cartridges will be in different locations depending on the device.
  3. Step 3: Remove the new toner cartridge from its packaging.
  4. Step 4: Insert the new cartridge into the machine.
  5. Step 5: Close the front cover.

How do I reset my HL 2130 printer?

Brother HL-2130 – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

Why won’t my Brother printer recognize the toner cartridge?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

Leave a Reply

Your email address will not be published. Required fields are marked *


How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]

What Generic Printer Drivers Work With Brother Printers? (Question)

The Brother Universal Printer Driver is a printer driver for use with Brother machines on your network. You can search for available Brother machines on your network and print documents without installing separate printer drivers. Contents1 Is there a generic printer driver?2 How do I download drivers for my Brother printer?3 How do I know […]