Brother All In One Printer Where Does The Printer Paper Go? (Best solution)

Pull the paper tray completely out of the machine. Press and slide the paper guides to fit the paper. Load paper in the paper tray with the printing surface face down. Make sure the paper is below the maximum paper mark ( ).

Where is the paper tray on a printer?

Paper is housed in the printer’s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper. Within the paper tray, you will notice a guide that can be adjusted to fit your preferred paper length.

How do you open the paper tray on a Brother printer?

How to load the paper tray

  1. If the paper support flap (1) is open, and then close the paper support (2).
  2. Pull the paper tray completely out of the machine.
  3. Open the output paper tray cover (1).
  4. Gently press and slide the paper width guides (1) and paper length guide (2) to fit the paper you’re loading.
You might be interested:  How To Connect Brother Printer To Phone? (Perfect answer)

How do I change the paper on my Brother printer?

To change your Brother machine’s Paper Type setting, follow these steps:

  1. Press the MENU key.
  2. Press the UP OR DOWN ARROW key to select General Setup.
  3. Press the OK key.
  4. Press the UP OR DOWN ARROW key to select Paper Type.
  5. Press the OK key.
  6. Press the UP OR DOWN ARROW key to select the paper type you want to use.

Where is the input tray?

The input tray is the tray on the printer that serves as the paper source. The output bin is a bin on the printer where printed jobs are delivered. Users can use the input-tray and output-bin job attributes to specify a tray name, such as 3-hole and a bin name, such as staple.

Can you add a tray to Brother printer?

Click the Accessories tab and click Auto Detect. After Tray 2 has been detected, click Apply. – If Auto Detect does not detect the tray, you can manually add it. Under Available Options, select the tray, click Add and then Apply.

How do you remove a paper tray from a printer?

Removing Paper Jammed in the Paper Tray (Tray 1)

  1. Lift the output tray.
  2. Pull out tray 1. Pull tray 1 completely out.
  3. Remove jammed paper.
  4. Push tray 1 gently in until it stops.
  5. Lower the output tray.
  6. Open and close the scanner unit.

How do you remove a paper tray?

To remove the paper tray:

  1. Open the paper tray and remove any paper.
  2. Pick up the front of the tray, pull it out slightly, and lower the tray back down so it is level.
  3. Pull the right side of paper tray out. Move the paper tray to the right and take the tray out of the machine.
You might be interested:  How Do I Find The Ip Address On A Brother Hl2270 Printer? (Solution found)

How do you load paper in a Brother MFC 9340cdw?

Pull the paper tray completely out of the machine. While pressing the green paper-guide release lever (1), slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots. Fan the stack of paper well to avoid paper jams and misfeeds.

How do I access my Brother printer settings?

FAQs & Troubleshooting

  1. Open the Printers Folder. Click here to see how to open Printing Preferences.
  2. Right-click on the Brother printer driver and left-click on Printing Preferences. You can change the following settings: Basic tab. Advanced tab. Print Profiles tab. Basic tab.

Where is the printer setting tool?

Open the Printer Setting Tool: Windows 10: From the Start button, click All apps → Brother → Label & Mobile Printer → Printer Setting Tool.

How do I print with photo paper on my Brother printer?

Load photo paper

  1. Pull the paper tray completely out of the machine.
  2. Open the output paper tray cover (1).
  3. Do one of the following:
  4. Close the output paper tray cover.
  5. Load up to 20 sheets of Photo or Photo L paper in the paper tray print side down.
  6. Open the output paper tray cover (1).

How do printers feed label paper?

If you have an inkjet printer, fan the paper and load it into the “in” tray with the label side facing down. For laser printers, load the paper into the input tray with the label side facing up. If your laser printer has a priority feed slot, load a single sheet of label paper into it at a time.

You might be interested:  How To Reset Page Counter On Dcp Brother Printer? (Best solution)

What is inkjet paper used for?

This type of paper is a normal paper which can be used on laser printer, copiers and as well on inkjet papers. The use of this paper on inkjet paper is for document printing only or simple graphics. Attempts to print photographic or complex graphic images will result in very poor print quality.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

How To Connect A Brother Wireless Printer To Phone? (Solution)

Android™ Tap the Settings icon. Tap Wi-Fi. If your Wi-Fi is turned Off, turn it On. Find the SSID you wrote down earlier, and then tap it. Enter the network key (password) you wrote down earlier, and then tap CONNECT. The wireless connection setup is complete if Connected appears under the SSID name selected earlier. […]

How To Low Toner On Brother Printer? (Best solution)

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your […]