What Do I Do When My Canon Printer Says Paper Jam But There Is None?

  1. unplug and turn the printer off.
  2. open the front of the printer.
  3. gently move the print head to the right to expose some gears on the left side.
  4. manually turn these gears back and forth a few times (be careful not to damage the clear plastic disc next to the larger gear)
  5. turn it back on and it should work.

Why does my Canon printer say paper jam when there isn’t one?

The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed.

How do I reset my Canon printer after paper jam?

Remove the paper following the procedure below.

  1. Turn off the printer, and unplug the power cord of the printer from the power supply.
  2. Remove the Cassette.
  3. Set the printer upright with the left side down.
  4. Slowly pull the jammed paper out so that the paper does not tear.
  5. Align the paper, then reload it in the Cassette.
You might be interested:  Question: How To Set Up Printer On Macbook Air?

What do I do when my printer says paper jam but there is none?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

How do you clear a paper jam status?

Solution one: Clear the paper jam

  1. Step one: Remove any loose paper. Remove any loose sheets of paper from the input tray and the output tray.
  2. Step two: Clear the paper jam from the rear of the product.
  3. Step three: Open the cartridge access door, and then clear the jam.
  4. Step four: Print a printer status report.

How do you clear a paper jam on a Canon e560?

If you were not able to remove the paper out in step 1:

  1. Turn the machine off, then unplug the power cord.
  2. Stand the machine with the right side facing down.
  3. If the protective material for the transport unit remains attached, remove it.
  4. Push the open lever to open the transport unit.
  5. Pull out the jammed paper slowly.

Why is my paper getting stuck in my printer?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.

You might be interested:  FAQ: Why Is My Printer Not Printing?

How do you unjam a printer?

Grip both sides of the paper and gently pull it out of the printer if the jammed paper is still visible in the feeder tray. Remove the paper slowly to avoid tearing the paper.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]