Readers ask: What Do I Do When My Epson Printer Says Paper Jam But There Is None?

Generally, epson printer paper jam issue can be fixed by following tricks.

  1. Remove the printer header.
  2. Check if there is any broken paper available.
  3. try to move the roller gently to check if it moving properly or not.
  4. place the printer header back again. and reboot your printer once.
  5. now try to print something.

How do I reset my Epson printer paper jam?

Paper Jam Problems

  1. Cancel the print job from your computer, if necessary.
  2. Gently pull out any jammed paper from the output tray and sheet feeder.
  3. Press the start button to resume printing.
  4. Press the power button to turn the product off.
  5. Lift up the scanner unit, and remove the jammed paper and any torn pieces.

Why does my printer say paper jam when there isn’t one?

If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.

You might be interested:  Quick Answer: How To Hook Up Printer To Iphone?

How do you fix a false paper jam?

Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Where is the reset button on an Epson printer?

Locate the control panel of your Epson printer. It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

How do I clear a paper jam on my Epson 3760?

Paper Jams in the Automatic Document Feeder

  1. Cancel the print job, if necessary.
  2. Remove your originals from the ADF.
  3. Open the ADF cover, then carefully remove any jammed paper.
  4. Leave the ADF cover open, then raise the scanner unit.
  5. Press the tabs and remove the document mat.
  6. Carefully remove any jammed paper.

What to do when your printer says there is no paper but there is?

If you keep on getting error messages saying there is no paper in the printer, check the paper rollers and clean any specks of dust or debris. Also, make sure the paper stack is not wrinkled or bent. Take out the stack of paper and push the tray back in. Take it out again and put back the paper.

You might be interested:  Quick Answer: Why Is My Printer Spooling And Not Printing?

How do I fix the paper feed on my Epson printer?

Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.

How do I reset my Epson printer?

To Factory Reset an Epson printer:

  1. Turn off the printer.
  2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
  3. Turn on the printer while holding the reset button.
  4. Wait until a message prints indicating that the printer is resetting.

How do I reset my Epson wireless printer?

Reset the Printer’s Network Settings for the Epson Artisan 800

  1. If necessary, press the Home button on the control panel to return to the Home menu, then select Setup.
  2. Press, then press Restore Default Settings.
  3. Press Reset Network Settings.
  4. Select Yes as necessary to reset the printer’s network settings.

How do I reset my Epson printer without the software?

The steps to factory reset the printer by this method are:

  1. Turn off the printer using the Power button.
  2. Use a pin to press and hold the Reset button at the back of the printer.
  3. Turn on the printer but keep the Reset button pressed for at least 5 seconds.
  4. Release the Reset button after a warning page is printed.

Where is the reset button on Epson 2720?

Resetting Control Panel Defaults

  1. Press the home button, if necessary.
  2. Select Settings and press the OK button.
  3. Select Restore Default Settings and press the OK button.
  4. Select one of these options and press the OK button: Network Settings: Resets all network settings.
  5. Press the OK button to reset the selected settings.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]