To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

•

How do I connect my Brother printer to my computer wirelessly?

Set up the wireless connection manually with the printer driver installed (For Windows)

1. Make sure that the printer driver, Printer Setting Tool, and P-touch Editor are installed on your computer.
2. Turn on the printer.
3. Make sure the printer’s Wi-Fi LED is flashing.
4. Connect the printer to the computer with a USB cable.

How do I connect my brother wireless printer without the CD?

Turn on your computer if it isn’t already on. You should already have installed the printer drivers. Open the printer network driver and select the configure option, choosing the “Brother Peer-to-Peer Network.” Connect the USB cable to the printer and computer.

Why can’t I connect to my wireless Brother printer?

Primary Guide to Solve Brother Printer WiFi Connection Problem. First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Try to connect your Brother printer to the Wifi using WPS method.

How do I get my Brother printer to recognize my computer?

Do the following steps to solve the problem:

1. Check the status of your Brother machine.
2. Check the connection of your Brother machine and the computer.
3. Check the printer driver settings.
4. Try printing from another application.
5. Restart your Brother machine and the computer.
6. Reinstall the printer driver.

Where can I find WPS pin on Brother printer?

Press Network. Press WLAN. to display WPS w/PIN Code, and then press WPS w/PIN Code. The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.

How do I know if my Brother printer is connected to WiFi?

Check your machine’s wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report. If your WLAN report is stating “Connection OK”, although you can not scan, refer to “Check the wireless status on the WLAN report” and check “Connection: OK”.

How do I reinstall my wireless Brother printer?

Follow the steps below to install the driver.

1. Open the Control Panel.
2. Click Hardware and Sound => Devices and Printers.
3. Click Add a printer.
4. Select the model name and click Next.
5. When the following window appears, select Brother from the Manufacturer list.
6. Select the model name and click Next.

How do I connect my Brother printer without WiFi?

Click “Printer” at the top of the window, and then look for a blue check mark to the left of “Use Printer Offline.” If the check mark is there, click the “Use Printer Offline” option to remove it, at which point your documents will start printing.

How do I install my Brother printer driver to my computer?

Follow the steps below to install the driver.

1. Open the Control Panel.
2. Click Hardware and Sound => Devices and Printers.
3. Click Add a printer.
4. Select the model name and click Next.
5. When the following window appears, select Brother from the Manufacturer list.
6. Select the model name and click Next.

Why is my Brother printer not discoverable?

Verify that all devices on the network where your PC and the Brother machine are connected work correctly. Turn off the Brother machine and turn it back on. The built-in network card may not work for some reason. Turn off the Brother machine and turn it back on, this will reset the network card.

What is a wireless installer?

The duties and responsibilities of a wireless internet installer involve working to install, test, and maintain wireless internet equipment. In this career, you may need to repair wireless signal devices and adjust wireless signals to limit interference.