The Epson printer not connecting to the Wi-Fi problem usually occurs if you are using an outdated printer driver. Feel free to try correcting this annoying problem by simply using a software update utility. Additionally, check if the issue is triggered due to your Internet connection by verifying the network settings.

How do I reconnect my Epson printer to WIFI?

Here’s how:

1. Turn your Epson printer on.
2. Press the Home button on the printer’s control panel.
3. Use the arrow button to select Wi-Fi Setup.
4. Press OK until you see the selection.
5. After it’s searching, choose the network name on the screen.
6. Enter your network password.
7. Wait for this screen then press OK.

Why is my WiFi not connecting to my printer?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

How do I get my router to recognize my printer?

This error usually occurs if the printer or the router configurations are corrupted. Why won’t my printer recognize my router?

1. Press the Wireless button and the Cancel button from the printer Control Panel simultaneously and hold them from about 5 seconds.
2. This should reset the printer to network default.

Why won’t my iPhone find my wireless printer?

If an AirPrint-enabled printer isn’t showing up on your iPhone, head to the printer’s network settings and ensure its Wi-Fi is enabled. Most importantly, make sure the printer is connected to the same Wi-Fi network as your iPhone. If the problem persists, the printer could be blocked or blacklisted on the network.

How do I connect my Epson l4150 to WIFI?

Press and hold down the Wi-Fi button on your product for 3 seconds. The Wi-Fi light turns green to indicate a successful connection. Note: Be sure to press and hold the Wi-Fi button on your product within 2 minutes of pressing the WPS button on your router or access point.

How do I reset my Epson l355 WIFI?

Restoring Default Wireless Network Settings

1. Press the power button to turn off your product.
2. Press and hold the network status button and press the power button to turn your product back on. The network settings are restored to their factory defaults and your product turns on.

Why is my printer not discoverable?

Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer’s system.

How do I make my network printer discoverable?

Select Network and Internet > Network and Sharing Center > Change advanced sharing settings. In the Advanced sharing settings dialog box, expand the Private section. Next, under Network discovery, select Turn on network discovery. Under File and printer sharing, select Turn on file and printer sharing.

What are two methods to connect to a printer wirelessly?

There are three main ways to connect your printer into your Wi-Fi network: using Wi-Fi Protected Setup (WPS), using the printer’s onboard Wireless Setup Wizard, or by connecting your printer to your computer via USB and using the supplied software to configure the wireless connection.