Question: What Is Printer Head Alignment?

Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the machine is set for automatic head alignment.

How do I fix my printhead alignment?


  1. Make sure that the power is turned on.
  2. Load three sheets of A4 or Letter-sized plain paper.
  3. Open the printer driver setup window.
  4. Print the print head alignment pattern. (1) Click the Maintenance tab. (2) Click Print Head Alignment.
  5. Adjust the print head position.

Is print head alignment necessary?

Perform the print head alignment procedure when you hear that scraping sound as the machine works so that you restore proper alignment before the print heads are irreparably damaged by this contact. It is also wise to run a print head alignment when you are changing from using thick paper to thinner paper.

You might be interested:  FAQ: How To Fax Something From Printer?

What is print head alignment Epson?

Align the Print Head. If your printouts become grainy or blurry, or you see dark or light bands across them, you may need to align the print head. Note: Dark or light bands may also appear on your prints if your print head nozzles need cleaning. You can align the print head using the control panel or your software.

How do I align my Canon printhead?

Manual print head alignment

  1. Open the printer driver setup window.
  2. Select Custom Settings on the Maintenance tab.
  3. Check the Align heads manually check box.
  4. Select OK when the prompt appears.
  5. Select Print Head Alignment on the Maintenance tab.
  6. Load 3 sheets of A4 or Letter size plain paper into the rear tray.

Why is my printer printing out of alignment?

Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.

How long does printhead alignment take?

The print head alignment pattern is printed. Printing takes about 4 minutes to complete. Do not open the Print Head Cover while printing. Clicking Print Alignment Value prints the current settings and finishes Print Head Alignment.

When should you align the print heads on your inkjet printer?

Are you noticing horizontal white lines or regular patterns of light and dark over the whole range of your prints? These are signs that you may need to align your printhead.

You might be interested:  How To Share Printer Windows 7?

How do I adjust print head position?

Adjusting Print Head Position

  1. Open printer driver’s setup screen.
  2. On Maintenance tab, click Custom Settings. The Custom Settings dialog box appears.
  3. Set to manual adjustment.
  4. Apply settings.
  5. On Maintenance tab, click Print Head Alignment.
  6. Load paper in printer.
  7. Run head position adjustment.
  8. Check printed patterns.

What is the print head?

The printhead is a component in a printer that houses ink cartridges. It’s typically located under the cover of your printer, and it can become clogged with ink over time. A printhead can usually be cleaned in one of two ways: through software on your PC or manually by taking out the printhead.

Why is my Epson printer printing slanted?

If your printouts are slanted, try these solutions: Slide the edge guides against the edges of the paper. Select a higher print quality setting in your printer software. Turn off any high speed settings in your product software.

Why is my Epson printer printing double?

If the print heads are vertically or horizontally misaligned, however, the printer may unintentionally print the same letters or characters side by side. You can readjust the print heads in Windows or from the printer’s control panel.

Why is my Epson printer not printing straight?

If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem from your computer using the Print Head Alignment utility in your printer software. To align the print head automatically, select Automatic in the on-screen instruction.

How do I print a Canon calibration?

How to Calibrate a Canon Printer

  1. Turn on the Canon printer.
  2. Select “Adjust Printer” option from the printer’s main menu.
  3. Select the “Calibration” option from within the “Adjust Printer” menu.
  4. Check the printout produced by the calibration to ensure that the colors and alignment look correct.
You might be interested:  Often asked: How To Add A Printer On Windows?

Why is my Canon printing blurry?

How can I fix the printer that prints blurry? You can start by checking the ink levels and alignment from the maintenance page. If that doesn’t help, the issue might be clogged print head nozzles, so be sure to clean them. Lastly, you can also try updating drivers to the latest version and check if that helps.

How do I calibrate my Canon printer?

Choose the “Calibration” option. When the next set of options is visible on the screen, select ” Auto Adjust ” and select “Yes.” Press the “OK” button on the printer to begin the calibration process. The printer will print out a test sheet.

Leave a Reply

Your email address will not be published. Required fields are marked *


Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]