Often asked: How To Replace Drum On Brother Printer?

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Take out the drum unit and toner cartridge assembly.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.
  6. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

What do I do when my Brother printer says drum replacement?

How do I clear the message ‘Replace Drum’?

  1. Make sure that the machine is turned on.
  2. Press the cover release button and then open the front cover.
  3. Remove the old drum unit and toner cartridge assembly.
  4. Hold down the green lock lever on the left and pull the toner cartridge out of the drum unit.
You might be interested:  Often asked: How To Connect Printer To Computer Wirelessly?

How do you reset the drum on a Brother printer?

To reset the drum counter:

  1. Press the UP OR DOWN ARROW key to select Machine Info.
  2. Press the UP OR DOWN ARROW key to select Reset Parts Life.
  3. Press the UP OR DOWN ARROW key to select Drum Unit.
  4. Press the UP ARROW key to reset the drum unit counter.
  5. The display will show ‘Accepted’ and the machine will return to ‘Ready’.

Where is the Brother printer drum?

For Brother printers, the drum unit is usually connected to the toner cartridge. 1. To find it, simply open the front flap of your laser printer and find the toner cartridge(s) which the drum unit will be attached to or beneath.

What happens if I don’t replace printer drum?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

How long should a drum last on a Brother printer?

The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.

How do I reset my printer after replacing drums?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.
You might be interested:  How Do I Make My Printer Online?

What are the signs that a printer drum needs to be replaced?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

What happens when printer drum goes bad?

What happens when a printer drum goes bad? When the drum wears out, you’ll begin seeing lines or faults repeated across the page. Replace the drum unit when you get white lines on your pages.

How do I know if my Brother printer needs a new drum?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

How do you reset the drum on a Brother HL l2320d?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

How do you install a printer drum?

How to replace or install the drum unit

  1. Make sure the machine is turned on and open the front cover.
  2. Remove the toner and drum assembly from the machine.
  3. Push down the green lock lever and take the toner out of the drum.
  4. Unpack the new drum unit.
  5. Insert the toner in the drum.
You might be interested:  Readers ask: How To Connect Brother Printer To Computer Wireless?

When should I replace my printer drum?

As a general rule, you should always replace your drum unit after using three to four toner cartridges just to be safe. Page yields are also calculated, with only 5% of the page being filled as an entire page. Depending on your usage, you may need to change your drum unit faster than before.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]