How To Reset The Drum On A Brother Printer?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do I reset my printer after replacing drums?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

You might be interested:  Question: How To Connect Ricoh Printer To Computer?

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

How do you reset the drum life on a Brother printer MFC l2710dw?

Reset the Drum Counter

  1. Make sure the machine is turned on.
  2. Close the front cover.
  3. Press OK and the Up arrow key at the same time.
  4. Press OK to select Drum.
  5. Press the Up arrow key to reset the drum counter.

How do you reset the drum on a Brother HL l2320d?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

How do you reset the drum on a Brother printer HL L5100DN?

HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
  4. Press for [Reset] to reset the drum counter.
  5. Close the front cover of the machine.

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

You might be interested:  FAQ: How Do I Change The Print Settings On My Brother Printer?

What happens if you don’t replace the drum in a printer?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

How do you reset the drum on a Brother printer MFC l2740dw?

How to reset the drum counter:

  1. Press the “X” on the printer to display to interrupt the “replace drum” message.
  2. Press the tool button (settings) > All Settings > Machine Info. > Parts Life.
  3. Hold down the # button until the LCD message changes.
  4. Press “Drum” and then select “Yes”
  5. Select the home button.

How do you reset the drum counter on a brother mfc 7460DN?

How to: Reset Toner Counter on Brother MFC-7460DN

  1. Open the front panel.
  2. Press the Clear/Back button. The display will show: REPLACE DRUM? Yes 2. No.
  3. Ignore the display, and type *00 on the keypad. You should see accepted on the display.
  4. Close the front panel, and you should be good to go.

How do I reset my MFC-L2710DW?

How to Reset Toner on Brother MFC-L2710dw, TN-760 Toner

  1. Open front cover of printer (to reveal the cartridge mechanism) and “Front Door Open” will flash on the display.
  2. Next, press STOP/EXIT and CLEAR at the SAME TIME (one quick press)
  3. Immediately after, press CLEAR once again.
  4. A menu called RESET MENU will appear.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]