FAQ: Why Is My Canon Printer Printing Blank Pages When It Has Ink?

There may be a default in hardware or printer drivers of the Canon printer. Low Ink levels or any fundamental issues may cause the problem of Canon printer printing blank pages. Due to the blockage of vacuum in your printing device. Some corrupted softwares can also be the reason for this problem.

Why is my Canon printer not printing when the ink is full?

If the print quality is poor or no ink is appearing on the page, it may be due to one of the following: Ink in the Bubble Jet (BJ) cartridge or tank has run out. Printhead nozzles on the cartridge may be clogged. Protective cap or tape may be attached to the cartridge.

Why is my printer printing blank pages when I have ink?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

You might be interested:  Readers ask: How To Scan A Document On A Brother Printer?

How do you flush a Canon ink cartridge?


  1. Make sure that the printer is turned on.
  2. Press the Setup button.
  3. Select Maintenance and press the OK button.
  4. Select Ink Flush and press the OK button.
  5. Check the displayed message and press OK button.
  6. Check the displayed message, select Yes and then press the OK button.

How do I stop my printer from printing extra blank pages?

Locate your printer, right-click it, and choose Printing Preferences. Go to the Paper tab and there you should see the Separators option. Set it to No Separators and save changes.

How can you tell if a printhead is clogged?

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it’s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it’s time to remove the excess ink.

What is a Canon ink flush?

Ink flush consumes a lot of ink, and the consumed ink is discharged to the maintenance cartridge. If the free space is low, replace it with a new maintenance cartridge. If the available capacity of the maintenance cartridge is low, a message is displayed and ink flush cannot be performed.

Where does the ink go when you ink flush?

The ink that is being consumed, runs thru tiny hoses in the cleaning station assembly/pumping mechanism, to the waste ink pads. Those pads are usually located inside the printer, where you cannot see them.

You might be interested:  Often asked: How To Add My Printer To My Computer?

What does an ink flush do?

Power Ink Flushing affects the service life of the ink pads by causing them to reach their capacity sooner. When an ink pad reaches the end of its service life, the product stops printing and you must contact Epson for support.

Why is my Canon printer not printing properly?

If your Canon printer is not printing properly, it may be caused by a corrupt printer driver. Printer drivers should be up-to-date for security reasons. Also, out-of-date Canon printer drivers often cause printer issues, so it’s best to enable automatic updates on your printer driver for less hassle on your end.

How do I reset my Canon ts3100 printer?

Press the Setup button until “11” appears on the LCD and press the Black button or the Color button. The network settings are initialized.

Leave a Reply

Your email address will not be published. Required fields are marked *


Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]