FAQ: Why Does My Brother Printer Keep Jamming?

You may be putting too much paper into the paper tray. It should never be overfilled as it can often cause a jam. Also, make sure the paper fits the tray and that it’s inserted correctly. Because the wrong size or incorrectly positioned paper can get stuck in the printer.

Why is my Brother printer constantly jamming?

When the lubricant between the gears mixes with dust it becomes sticky and the rocker does not behave as it should. You will know this is the case when the printer jams only if you have more than one piece of paper in tray 1. Otherwise you will only have one piece of paper to feed and it will not jam.

Why is my printer jamming every time?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.

How do I fix my printer from jamming?

Step 2: Clear a jam from the inside of the printer

  1. Turn off the printer.
  2. Disconnect the power cord and any other cable.
  3. Remove jammed paper from the following areas.
  4. Replace any parts that were removed, and close any open doors.
  5. Reconnect the power cord, and other cables that were disconnected.
  6. Turn on the printer.
You might be interested:  What Does A Printer Cable Look Like?

How do I fix my Brother printer jam?

Follow these steps:

  1. Unplug your Brother machine from the AC power outlet (electrical socket).
  2. Pull the paper tray (1) completely out of your Brother machine.
  3. Pull out the jammed paper (1).
  4. Lift the Jam Clear flap, and remove the jammed paper.
  5. Put the paper tray firmly back in your Brother machine.

Why does printer paper keep jamming?

Overfilling the paper tray is frequently causes paper jams. Many printers have sliding mechanisms that allow different types and sizes of paper to be fed into the printer. If the slider is not correctly positioned, it can cause a paper jam. Use standard office paper.

How do you fix a constant paper jam?

How to Fix a Paper Jam in a Printer

  1. Turn off and unplug the printer.
  2. Remove all printer paper from the tray and then reload it.
  3. Open the rear access door or duplexer (or any other doors that give you access to the paper’s path through the printer)
  4. Close the doors and plug in the printer.

How do you clean a printer roller?

Dip a cotton swab in alcohol and use it to clean your LaserJet printer rollers. Gently rub it over the surface of your printer rollers. Wipe the rollers off and dry them completely before reinstalling them in your printer. Make sure the cotton swab is just moistened with alcohol and not dripping wet.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Often asked: How To Find Printer Mac?

Add the printer to your list of available printers: Choose Apple menu > System Preferences, then click Printers & Scanners. If you don’t see your printer listed on the left, click the Add button at the bottom of the list. A dialog appears listing printers on your local network. Contents1 How do I get my […]

Often asked: How To Reconnect A Wireless Printer?

If your printer and router both support WPS push-to-connect, simply push the WPS button on your printer, then press the WPS button on your router within two minutes. The connection will be made automatically. Some older wireless printers may require you to connect to a computer first to set up the wireless connection. Contents1 How […]